Smeg LBS1600X manual

Page 12

GB

Economy cycle button

- e

Extra Rinse button

Delicates button

Half load button

1/2

O “Start/Pause” button

Press this button for cottons programmes, the machine will perform an extended wash at 35°C (biological step) thereby offering good washing performance combined with power saving.

The machine then continues the cycle at the selected temperature.

N.B.:

Press the economy cycle button to obtain a maximum washing temperature of 60° C and the elimination of the pre wash cycle.

In areas with soft water or to improve rinsing, press this button (optional for intensive programmes) to enable the extra rinse function (about 20% more water).

Press this button to reduce movement of the drum and, consequently, of the washing. Suitable for particularly delicate garments (shirts, silk, curtains, etc.)

If the machine is used with a smaller amount of washing than that indicated in the “Programme Chart”, press this button to save water, detergent and electricity.

This option should not be used for synthetics or woollens.

The recommended doses of detergents should be reduced in proportion to the load.

Press this button to start the selected washing programme. During washing, press the “Start/Pause” button for about 3 seconds to pause the washing cycle. During the pause, the “Time remaining” Led flashes and STOP appears on the display. To resume the washing cycle from where it left off, simply press the “Start/Pause” button again.

PTimed drying shown on display LED

QAutomatic drying activation with humidity sensor shown on display LED

This LED indicates that drying is carried out with the selected drying time.

This LED indicates that drying is carried out automatically with the selection of the required residual humidity level (Aut1 or Aut2)

RButton activation shown on This LED indicates that the corresponding buttons have been

LEDpressed.

12

Image 12
Contents Washer Dryer Contents NEW Washing System Safety Warnings Page = brown N = blue = yellow-green Installation Instructions UnpackingPositioning and Levelling Water Supply Connection Drain ConnectionElectrical Connection Description of Controls Control PanelDisplay LED LEDOptions buttons Quick wash Button Page Washing Instructions Detergent TrayPreparing the Washing Opening the Door Loading the WashingAdding Detergent and Additives Dosing Powder Detergents Dosing Liquid DetergentsSCALE-REMOVERS Modifying Starting Parameters Wool programmeStarting the Washing Programme Interrupting or Changing the Washing ProgrammeEND of Programme END of Programme BeeperUsing the Machine for Drying Purposes General InformationAutomatic Drying Timed Drying WASH-DRY ProgrammeDRY-ONLY Programme Interruption or Change of Drying ProgrammeCleaning and Maintenance External CleaningCleaning the Drum Cleaning the Door GasketCleaning the Detergent Tray Cleaning the Water Inlet Filter Troubleshooting Error Signals Control Panel Symbols Programs Options Other Symbols