Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions before starting the program.
C Auxiliary function buttons may differ according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.
For example: If you want to select
• Prelavaggio (Prewash)
A
•Risciaquo Aggiuntivo (Rinse Plus) With this function, you can increase the number of current rinsing steps. Thus, sensitive skins’ risk of being affected by the remainder detergent on the clothes will be decreased.
•Antipiega (Rinse Hold)
If you do not want to unload your clothes immediately after the cotton, synthetics, woolen and delicate fabrics program, you may release your clothes inside the machine in the last rinsing water by pressing the rinse hold button in order to prevent your clothes become wrinkled. After this process you may spin your laundry by pressing “Start/Pause/ Cancel” button or you may end the program by pressing “Start/Pause/Cancel” button for 3 sec.
•In the machines equipped with spin speed selection knob or button, you can spin by selecting the desired spin speed and press “Start/Pause/Cancel” button.
•As for machines not equipped with a spin speed selection knob, you can end the program without a spin cycle by pressing the “Start/Pause/Cancel” button and draining the water. If you wish your clothes be spun, you can spin them by selecting “pump+spin” program.
•No Heat
If you wish to wash your clothes in cold water, you can use this program.
• Esclusione Centrifuga (No Spin)
You may use this program if you do not want to spin your clothes at the end of cottons, synthetics, woolen or delicate programs.
• Spin speed reduction
You may use the speed reduction button whenever you wish to spin your clothes below the maximum spin speed. When speed reduction button is pressed, spin speed will be at the minimum rpm given on the panel.
Starting the Program
Press “Start/Pause/Cancel” button to start the program. “Start/Pause/Cancel” button will light up to indicate that the program has started. The door is locked and the “Lid” light fades.
Progressing a program
Progress of a running program is shown through the program
C If the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated because of excessive unbalanced distribution of laundry in the machine.
Changing the selections after the program has started
You can use this feature after your machine has started to wash different textile groups in the same batch of clothes under higher or lower temperatures. You must cancel the ongoing program in order to change the washing program.
For example, press and hold the “Start/Pause/ Cancel” button for 3 seconds to “Cancel” the program in order to select “Cottons 40” program instead of “Cottons 60” program. Select the “Cottons 40” program by rotating the program knob. Press “Start/Pause/Cancel” button to start the program.
Switching the machine to standby mode
Press “Start/Pause/Cancel” button momentarily to switch your machine to the standby mode. Auxiliary functions can be cancelled or selected in accordance with the step the program is at. The door can be opened if the water level is suitable. Laundry may be added / taken out by opening the door.
Child-proof lock
You can protect the appliance from being tampered by children by means of the child- proof lock. In this case, no change can be made in the running program.
8 - EN