6GB10055.fm Page 3 Monday, August 2, 2004 12:33 PM
FIRST WASH CYCLE
We recommend that the first wash cycle be carried out empty. This will remove any residual water used in the factory checks.
1.Turn on the tap.
2.Close the drum flaps.
3.Pour a small amount of detergent (about 30 ml) into the detergent dispenser 
.
4.Select a short programme (see programme chart).
5.Switch on the machine.
6.Press the “On/Off” button.
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
1.Packing
•The packaging materials are 100% recyclable and bear the recycling symbol 
. Adhere to local regulations when disposing of packaging material.
2.Energy saving tips
•Achieve the best use of energy, water, detergent and time by using the recommended maximum load size.
•Do not exceed the detergent dosages indicated in the manufacturer’s instructions.
•The Eco Ball - a special system in the outlet - will prevent detergent loss from the drum to avoid detergent loss into the environment.
•Use “Prewash” for heavily soiled laundry only! Save detergent, time, water and energy consumption by not selecting “Prewash” for slight to normally soiled laundry.
•Pretreat stains with stain remover or soak dried in stains in water before washing to reduce the necessity of a hot wash program.
•Save energy by using a 60°C instead of a 90°C wash programme or a 40°C instead of a 60°C wash programme.
•Save energy and time by selecting a high spin speed to reduce the water content in laundry before using a tumble dryer (for machines with adjustable spin speed).
3.Disposing of packaging and old washing machines
•The washing machine is built from reusable materials. The washing machine must be disposed of in compliance with current local waste disposal regulations.
•Before scrapping, cut of the power cable so that the washing machine cannot be connected to the mains.
•Remove detergent from compartment if you intend scrapping your washing machine.
4.Child safety
•Children must not be allowed to play with or in the washing machine.
5.General recommendations
•Do not leave the washing machine connected when not in use. Turn off the tap.
•Before cleaning or carrying out maintenance switch off the washing machine and disconnect it from the mains supply.
•To clean the outside of the washing machine, use a neutral detergent and a damp cloth.
•Do not use abrasive detergents.
•Do not attempt to force the lid open.
•If necessary, the power cable may be replaced with an identical one obtained from our After- Sales Service. The power cable must only be replaced by a qualified technician.
6.EC Declaration of Conformity
•This washing machine has been designed, constructed and distributed in compliance with the safety requirements of EC Directives: 73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive 93/68/EEC CE Marking Directive 
GB 3