Smeg KTL6 manual Description of the Washing Machine, Before the First Wash Cycle, Adjustable feet

Page 4

DESCRIPTION OF THE WASHING MACHINE

1.Lid

2.Detergent dispenser

3.Drum

4.Pump access behind filter

5.After-Sales Service sticker (behind the filter cover)

6.Mobility lever (depending on model)

• To move the washing machine: pull the handle out a little bit by hand and pull it out to the stop with the foot.

7.Adjustable feet

1

2

3

4

5

6

7

BEFORE THE FIRST WASH CYCLE

To remove any residual water used in testing by the manufacturer, we recommend that you carry out a short wash cycle without laundry.

1.Open the tap.

2.Close the drum flaps.

3.Pour a small amount of detergent (about 30 ml) into the main wash chamber of the detergent dispenser.

4.Close the lid.

5.Select and start a short programme (see separate programme chart).

GB 4

Image 4

Contents

Contents Before Using the Washing Machine Precautions and General Recommendations Description of the Washing Machine Adjustable feetBefore the First Wash Cycle Preparation of the Washing Sort the laundryStain removal Dyeing and bleachingLoading the laundry Choice of the right detergents and additives Detergents and AdditivesDosage Using chlorine bleach Where to put detergents and additivesUsing starch powder Cleaning the FILTER/ Draining Residual Water Water inlet hose filter Detergent dispenserWater inlet hose Appliance exterior and control panel Appliance interiorLid seal Water inlet hosesProblem Causes, Solutions, Tips Contains residues from Blocked see Care and MaintenanceSpin cycle Installation Animation appears during such update periodsDescription of red indications Red indication lampDescription Start/Pause light flashesIndication on Description Specify Before contacting After-Sales ServiceWait for the water to cool so as to avoid any accidents Removal of transport bracket Connect the water inlet hose Adjust the feetMake sure there are no kinks in the hose Water stop anti-flooding system Connect the water drain hoseEarth symbol Brown Live LTo fit a new plug, proceed as follows Polarized Plugs e.g pin, 13 amp plug conforming to BS 1363AKTL Programme Chart Consumption Data