JVC KS-FX822R manual Other Main Functions, Setting the clock, Changing the general settings PSM

ENGLISH

OTHER MAIN FUNCTIONS

Setting the clock	To check the current clock time while the unit
	is turned off, press DISP (display).
You can also set the clock system to either 24 hours	The power turns on, the clock time is shown for 5
or 12 hours.	seconds, then the power turns off.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

(See page 23.)

2 Set the hour.

1Select “CLOCK H” if not shown on the display.

2Adjust the hour.

1 2

3 Set the minute.

1Select “CLOCK M.”

2 Adjust the minute.

1 2

4 Set the clock system.

1Select “24H/12H.”

2 Select “24H” or “12H.”

1 2

5 Press SEL (select) to finish the setting.

Changing the general settings (PSM)

You can change the items listed on the next page

by using the PSM (Preferred Setting Mode) control.

Basic Procedure

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

(See page 23.)

2 Select the PSM item you want to adjust. (See page 23.)

3 Adjust the PSM item selected.

4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.

5 Press SEL (select) to finish the setting.

22