JVC KS-FX822R manual Specifications, FM Tuner, MW Tuner, LW Tuner

Page 35

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:

45 W per channel

Rear:

45 W per channel

Continuous Power Output (RMS):

Front:

17 W per channel into 4 Ω, 40 Hz

 

to 20 000 Hz at no more than

 

0.8% total harmonic distortion.

Rear:

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0 V/20 kΩ load (250 nWb/m)

TUNER SECTION

Frequency Range:

FM:

87.5 MHz to 108.0 MHz

AM:

(MW) 522 kHz to 1 620 kHz

 

(LW) 144 kHz to 279 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

CASSETTE DECK SECTION

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 100 sec. (C-60) Frequency Response (Dolby B NR OFF):

30 Hz to 16 000 Hz (Normal tape)

Signal-to-Noise Ratio: (Normal tape) (Dolby B NR ON): 65 dB (Dolby B NR OFF): 56 dB

Stereo Separation: 40 dB

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C Dimensions (W × H × D):

Installation Size: 182 mm × 52 mm × 150 mm

Panel Size: 188 mm × 58 mm × 14 mm

Mass: 1.4 kg (excluding accessories)

Design and specifications subject to change without notice.

ENGLISH

[MW Tuner]

Sensitivity: 20 μV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 μV

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents GET0017-001A E KS-FX922R/KS-FX822RContents Display window Location of the ButtonsControl panel Only for KS-FX922R This section is only for KS-FX922R Remote controllerReturn the battery holder Installing the batteryRemove the battery holder Place the batteryBasic Operations Turning on the powerTo drop the volume in a moment To turn off the powerF1 F2 F3 AM Radio Basic OperationsListening to the radio Receive FM station automatic preset SSMStoring stations in memory Other stations into other preset Numbers Tuning into a preset stationManual preset Repeat the above procedure to storeMode RDS OperationsMode To deactivate the TA standby mode, press TP Using Standby ReceptionPTY Standby Reception TA Standby ReceptionTo store your favorite programme types Press SEL select to finish the settingSearching your favorite programme Selecting your favorite programme for PTY Standby ReceptionLast selected PTY code appears Other convenient RDS functions and adjustmentsListening to an FM station Changing the display mode whileSetting the TA volume level Automatic clock adjustmentPTY codes To fast-forward and rewind a tape Tape OperationsListening to a cassette To stop play and eject the cassetteTo play back tapes recorded with the Dolby B NR Prohibiting cassette ejectionFinding the beginning of a tune Playing the current tune repeatedly Other convenient tape functionsSelect the item you want to adjust Sound AdjustmentsAdjusting the sound Adjust the levelSelecting and storing the sound modes Select the sound mode you wantWhen SCM Link is set to Link ON, select the source Recalling the sound modesRepeat the same procedure to store other sound modes Storing your own sound adjustmentsTo reset to the factory settings Call up the sound mode you want to adjustOther Main Functions Setting the clockChanging the general settings PSM Basic ProcedureEXT Preferred Setting Mode PSM items24H/12H To select the level meter Level To cancel Advanced SCM SCM LinkTo select the dimmer mode Dimmer To set the clock display ClockAttaching the control panel You can detach the contol panel when leaving the carDetaching the control panel Select the CD automatic changer CD-CH CD Changer OperationsPlaying CDs To fast-forward or reverse the trackTo go to a particular disc directly CanceledSelect the external component CD-CH External Component OperationsBefore you start What is DAB system?Select the DAB tuner Select the DAB band DAB1, DAB2 or DAB3To tune into a particular ensemble without searching To restore the FM/AM tunerSelect a service you want to listen to Service name Ensemble name Channel number FrequencyEach time you press Button, the DAB band changes as follows Storing DAB services in memorySelect the DAB band DAB1, DAB2 or DAB3 you want To use Alternative Reception Tuning into a preset DAB serviceSelect the number 1 6 for the preset DAB service you want While receiving a DAB serviceIgnition key-off release/Ignition key-on play MaintenanceTo clean the heads To keep the tape cleanCD changer does not Function incorrectly due to TroubleshootingSymptoms Causes Remedies LW Tuner SpecificationsFM Tuner MW TunerHaving Trouble with operation? Begint Druk op Before mounting PressVor dem Einbau Drücken Sie Avant le montage Appuyer surOpmerking Pour le sortir. S’assurer de conserver lesAlvorens de verbindingen tot stand te brengen Disconnect the speakers from this unit Verwendeten Leitungen mit Isolierklebeband umwickelnAvec de la bande isolante Gekleurde draden met isolatieband bedekken

KS-FX822R specifications

The JVC KS-FX822R is a versatile car stereo receiver that combines functionality and advanced technology to enhance the in-car audio experience. Designed with audiophiles and casual listeners in mind, this model boasts a range of features that make it a popular choice among car enthusiasts.

One of the main highlights of the KS-FX822R is its impressive sound quality. The receiver is equipped with a built-in 50 watts x 4 channel amplifier, which allows for powerful audio output that can fill any vehicle with crystal-clear sound. The sound customization options are extensive, featuring a 3-band equalizer that enables users to fine-tune audio settings to their specific preferences. Additionally, the stereo includes a high-pass filter, ensuring that the sound remains clean and distortion-free at high volumes.

In terms of connectivity, the JVC KS-FX822R offers Bluetooth technology, allowing for hands-free calling and wireless music streaming. This feature makes it easier for users to stay connected while on the road, ensuring that they can manage their calls and enjoy their favorite music without distraction. The receiver also includes a front USB port, which facilitates connection to smartphones and other devices for direct audio playback.

The KS-FX822R is compatible with various audio formats, including MP3, WMA, and WAV files, permitting users to enjoy a wide range of music collections. SiriusXM readiness adds to its versatility, enabling users to tap into a wide array of satellite radio channels.

Another noteworthy aspect of the JVC KS-FX822R is its user-friendly interface. The receiver features a large, easy-to-read display and intuitive control layout, making navigation effortless even while driving. The unit is also designed to be ergonomically friendly, with controls positioned for easy access.

Durability is also a key characteristic of the KS-FX822R. Its robust design is built to withstand the rigors of daily use, ensuring a reliable audio solution for years. This car stereo perfectly balances modern technology with practical features, making the JVC KS-FX822R an excellent addition to any vehicle for music lovers and tech-savvy drivers.
Top Page Image Contents