The “Wash” light on the program follow- up indicator illuminates when “Start/ Pause/Cancel” button is pressed after selecting the washing program. The “Program finished” lamp illuminates and the “Wash” light will fade when the program comes to an end. The “Lid” light flashes. Meanwhile, the door will stay locked for your safety and when it is safe to open, the “Lid” and “Program Finished” lights remain on.
You can put your machine into “Pause” mode by pressing the “Start/Pause/ Cancel” button when it is operating.
In this case, the “Start/Pause/Cancel” light will flash. Some changes in program settings can be made in pause mode (See. Changing a Program)
and if “Pause” mode is entered at an appropriate step of the program, the adding laundry function may be used. (See, Adding and taking out laundry). Press “Start/Pause/Cancel” button again to return to the “Wash” mode from “Pause” mode. In this case the “Start/Pause/Cancel” button will light up continuously and the machine will resume operating from the step it was paused.
•If the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated because of unbalanced distribution of laundry in the machine.
Changing the program after the program has started
You can use this feature after your machine has started to wash different textile groups in the same batch
of clothes under higher or lower temperatures.
For example;
Press and hold the “Start/Pause/ Cancel” button for 3 seconds to “Cancel” the program in order to select “Cottons 40” program instead of “Cottons 60” program.
Select the “Cottons 40” program by rotating the program knob.
Press “Start/Pause/Cancel” button to start the program.
CThe program which is selected first will go on even if the program selection button is moved and another program mode is selected while the machine is operating.
You must cancel the ongoing program in order to change the washing program. (See, Canceling a Program)
Selecting or cancelling an auxiliary function/temperature/spin speed
1.Press the “Start/Pause/Cancel” button to switch the machine to
“Pause” mode.
2.Change the auxiliary function’s temperature and spin speed.
Press “Start/Pause/Cancel” button to start the program.
CThe selection to be made must be appropriate. For example, if your machine is on the main wash cycle, you may select additional rinse auxiliary function, but you cannot select
CThe spin speed and temperature which are selected first will keep on being valid even if the position of the spin speed or temperature selection knob is changed. Press the “Start/ Pause/Cancel” button and switch the machine to “Pause” mode in order to change the spin speed or temperature. New spin speed or temperature can be selected.
Adding/removing laundry in standby mode
If you want to add more laundry into the machine after the washing cycle has started, put the machine into “Pause” mode by pressing the “Start/Pause/ Cancel” button. The “Lid” lamp on the program
19
EN