Auxiliary functions, Starting the Program

Auxiliary functions

Auxiliary function selection keys

•Desired auxiliary function depending on the program is selected.

•Some combinations cannot be selected together.

•Warning signal on the selected auxiliary function will light up.

Auxiliary function buttons may differ according to the model of your machine.

Auxiliary function selection

If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.

Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Selection Table”)

Pre-wash

A pre-wash is only worthwhile for heavily soiled laundry. Without pre-wash you save energy, water, detergent and time.

CPre-wash without detergent is recommended for lace and curtains. Less detergent should be put in the main wash compartment as loose knit fabrics (lace) foam too much due to its meshed structure.

Extra Rinse

With this function, you can increase the number of current rinsing steps. Thus, sensitive skins’ risk of being affected by the remainder detergent on the clothes will be decreased.

Rinse hold

If you do not want to unload your clothes immediately after the cotton, synthetics, woolen and delicate fabrics program, you may release your clothes inside the machine in the last rinsing water by pressing the rinse hold button in order to prevent your clothes become wrinkled. After this process you may spin your laundry by pressing “Start/ Pause/Cancel” button or you may end the program by pressing “Start/Pause/

Cancel” button for 3 sec.

•In the machines equipped with spin speed selection knob or button, you can spin by selecting the desired spin speed and press “Start/Pause/ Cancel” button.

•As for machines not equipped with a spin speed selection knob, you can end the program without a spin cycle by pressing the “Start/

Pause/Cancel” button and draining the water. If you wish your clothes be spun, you can spin them by selecting “pump+spin” program.

Spin speed reduction

You may use the speed reduction button whenever you wish to spin your clothes below the maximum spin speed. When speed reduction button is pressed, spin speed will be at the minimum rpm given on the panel.

No spin

You may use this program if you do not want to spin your clothes at the end of cottons, synthetics, woolen or delicate programs.

No Heat

If you wish to wash your clothes in cold water, you can use this program.

Starting the Program

1.Press “Start/Pause/Cancel” button to start the program.

2.“Start/Pause/Cancel” button will light up to indicate that the program has started.

3.The door is locked and the “Lid” light fades.

Progressing a program

Progress of a running program is shown through the program follow-up indicator.

•At the beginning of every program step, the relevant indicator lamp will light up and light of the completed step will turn off. The symbol that is lit up at the far right of the series of symbols indicates the step that is being carried out.