Special programmes, Temperature selection

• smartCARE (Self Clean)

Use this programme regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. Run the programme without any laundry in the machine. To obtain better results, put powder limescale remover for washing machines into the detergent compartment II. When the programme is over, leave the loading door ajar so that the inside of the machine gets dry.

C This is not a washing programme. It is a maintenance programme.

Do not run the programme when there is something in C the machine. If you try to do so, the machine detects

that there is a load inside and aborts the programme.

4.7 Special programmes

For specific applications, select any of the following programmes.

• Rinse

Use this programme when you want to rinse or starch separately.

• Spin + Drain

Use this programme to drain the water in the machine.

4.8 Temperature selection

Whenever a new programme is selected, the recommended temperature for the programme appears on the temperature indicator. It is possible that the recommended temperature value is not the maximum temperature that can be selected for the current programme.

Depending on the temperature you have selected, “Low Efficient”, “Efficient” or “High Efficient” appears on the display.

Press the Temperature Adjustment button to change the temperature. Temperature will decrease by steps of 10 °C.

C Temperature Adjustment button only serves for decreasing the temperature.

Finally, “-” symbol indicating the cold wash option appears on the display. "Cold Wash" appears on the display.

Cold Wash

The frame of temperature indicator is off in the C programmes that do not allow temperature adjustment.

When you press the Temperature Adjustment button, "Unadjustable" appears on the display.

Unadjustable

You can also change the temperature after the washing starts. If the Temperature indicator's frame is illuminated after the wash cycle has started, you can select the desired temperature. If the wash cycle has reached a point where you cannot change the temperature, the frame of temperature indicator turns off.

If you scroll to cold wash option and press Temperature C Adjustment button again, the recommended maximum

temperature for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the temperature.

4.9 Selecting the spin speed

Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the Spin Speed indicator.

It is possible that the recommended spin speed value is C not the maximum spin speed that can be selected for

the current programme.

Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually.

Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display.

C Spin Speed Adjustment button only serves for decreasing the spin speed.

C Rinse Hold option is indicated with “ı_ı” symbol and No Spin option is indicated with “_” symbol.

If you are not going to unload your laundry immediately after the programme completes, you can use Rinse Hold function in order to prevent them from getting wrinkled when there is no water in the machine.

This function holds the laundry in the final rinsing water.

Rinse Hold

If you want to spin your laundry after the Rinse Hold function:

11 / 48 EN	Washing Machine / User’s Manual