LG Electronics WD(M)-14220(5)FD, WD(M)-10220(5)FD, WD(M)-12220(5)FD No Water Supply, Assembly?

NO WATER SUPPLY

Option(Hot)

Option(Hot)Wiringdiagram

XAMmax

Is water supply shut-off?YESNO			YESNO
Is the tap opened?
When you press both Rinse button and Spin button
simultaneously, is the water level frequency below
240?	NO		YES
Is the inlet valve filter cloggedNOwith impurity?
Is resistance between each terminal of INLET			NO
VALVE ASSEMBLY is 2~8YESk		?
Check the voltage of the inlet valve connector			NO
220 - 240V~.
(Refer to 7-2 QC TEST MODE)
DETERGENT DOES NOT FLOW IN
Is water supplied?	YES		NO
Are replaceptacles correctly connected to the			NO
terminals of the INLET VALVEYES		ASSEMBLY?
Is detergent put in the correct compartment of			NO
the drawer?	YES
Is the detergent caked or hardened?			YES

Open the tap.

Check the AIR CHAMBER and the tube clogged with impurity.

Clean the filter.

Replace the INLET VALVE

ASSEMBLY.

Replace the MAIN PWB

ASSEMBLY

Refer to

NO WATER SUPPLY

Check the wiring on the dispenser.

Put the detergent in the correct position

PRE+MAIN

MAIN WASH

: Detergent

Clean the drawer.

20