4. INSTALLATION
Before servicing ask the customer what the trouble is.
Check the adjustment (power supply is
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works O Kor NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT | INSTALL THE APPLIANCE | ADJUST THE | |||
BOLTS | ON FLAT AND FIRM SURFACE | HORIZONTAL | |||
|
|
|
|
|
|
Remove the transit bolts |
|
|
|
| Turn the leveling feet to |
(4EA: ) with supplied spanner. |
|
|
|
| set the appliance horizontally. |
|
|
|
| ||
|
|
|
| ||
|
|
|
|
|
|
Keep the transit bolts and
spanner for future use.
Insert the provided 4 caps into the hole
High
1 | Low |
| |
| The appliance goes up by |
| rotating the feet clockwise. |
| The appliance comes down by |
| rotating the feet counter- |
| clockwise. |
7