•Delay start, a time value indicated in hours (23 hours max) and selected by means of the relevant button.
Delay
start
The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the Start/Pause button, the countdown is updated every hour, and, for the last two hours, every 30 minutes.
•An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.
•An alarm code indicates a fault in the machine operation (see page 28, "Something Not Working")
10 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up.
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.
When the washing or drying programme has finished, the “End” light comes on and a flashing zero appears on the display. The light of the ‘Start/Pause is off.
Prewash
Wash
Rinse
Rinse hold
Drain
Spin
Drying
End
ATTENTION!
If you turn the programme selector dial to another programme when the machine is working, all the lights of the programme progress display will flash for about 2 seconds but the machine will not perform the new selected programme.
E20
14