9 “Start/Pause” button
This button has two functions:
•Start: after you have selected the desired programme and options, press this button to start the washing machine. The light above the button will stop flashing and remain lit.
If you have selected a delay time, the countdown will begin and will be shown on the display.
•Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing. To restart the programme from the point at which it was interrupted, press the button again.
Important!
You must set the washing machine to Pause before you make any change in the programme in progress.
10 Display (Programme time)
The following pieces of information are shown on the display:
•Reset/cancellation of the programme
If the programme selector dial is turned to “Off” position, three blinking dashes are displayed. Now you can select a new programme.
(If, at the end of a washing cycle, the programme selector dial has not been turned to “Off” position , when you press the “On/Off” button to switch the machine on for the next washing, the display will show a blinking zero.)
•Duration of washing programme in hours and minutes, after you have selected a programme (for example 2.05).
The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.
2.05
While the programme is running (after you have pressed the Start/Pause button), the displayed time value decreases by one unit every minute.
1.25
•The washing machine has stopped with water in the tub, when the “Rinse hold” or “Quiet” option has been selected or at the end of the “Soak 30°”: this is indicated by a flashing zero.
•The washing machine has completed the programme: this is indicated by a flashing zero.
0
•Delay start, a time value indicated in hours (23 hours max) and selected by means of the relevant button.
Delay
start
17