IPSO 170 Pound Tumbler Dimensions Exhaust Outlet Locations, Cabinet Dimensions Models 120L/N

Page 6

Tumblers – 120 and 170

120 Pound Tumbler Dimensions and

Exhaust Outlet Locations

	TOP VIEW OF
	EXHAUST
	DUCT
	W
	X
	V
	H
	I
	U
B
A
	Y
C	Z
D	F
D
E	G
	TMB2333N

Cabinet Dimensions

	Models	A	B	C	D	E	F	G	H	I

	120L/N	31.38 in.	32.5 in.	48.91 in.	49.91 in.	67.92 in.	45.38 in.	46.38 in.	85.7 in.	70 in.
	120L/N	(797 mm)	(826 mm)	(1242 mm)	(1268 mm)	(1725 mm)	(1153 mm)	(1178 mm)	(2177 mm)	(1778 mm)
		(797 mm)	(826 mm)	(1242 mm)	(1268 mm)	(1725 mm)	(1153 mm)	(1178 mm)	(2177 mm)	(1778 mm)

	120S	31.38 in.	32.5 in.	48.91 in.	49.91 in.	67.92 in.	45.38 in.	46.38 in.	83.5 in.	70 in.
	120S	(797 mm)	(826 mm)	(1242 mm)	(1268 mm)	(1725 mm)	(1153 mm)	(1178 mm)	(2121 mm)	(1778 mm)
		(797 mm)	(826 mm)	(1242 mm)	(1268 mm)	(1725 mm)	(1153 mm)	(1178 mm)	(2121 mm)	(1778 mm)

Refer to Position and Level the Tumbler to temporarily reduce the heights of these models.

Exhaust Outlet Dimensions and Locations

	Models	U	V	W	X	Y	Z
	120L/N	63.45 in.	8.44 in.	5 in.	8.18 in.	6.82 in.	8.18 in.
	120L/N	(1612 mm)	(214 mm)	(127 mm)	(208 mm)	(173 mm)	(208 mm)
		(1612 mm)	(214 mm)	(127 mm)	(208 mm)	(173 mm)	(208 mm)

	120S	60.7 in.	8.44 in.	5 in.	8.18 in.	6.82 in.	8.18 in.
	120S	(1542 mm)	(214 mm)	(127 mm)	(208 mm)	(173 mm)	(208 mm)
		(1542 mm)	(214 mm)	(127 mm)	(208 mm)	(173 mm)	(208 mm)

5

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

4-08-45

Image 6

Contents On-Premise Laundry Planning Handbook Contents Introduction Model IdentificationGas Steam/Thermal Oil Pound Tumblers 120 Conversion Table Multiply To ObtainGas Models Specifications and DimensionsSpecifications Pound Steam ModelsExhaust Outlet Dimensions and Locations Models 120L/N Pound Tumbler Dimensions Exhaust Outlet LocationsCabinet Dimensions Models 120L/N 120SCabinet Dimensions Models Exhaust Outlet Dimensions and Locations Models 170L/N/S170L/N/S Electric and Gas Connection Locations for Gas Models Models Electrical Connection Gas ConnectionNon-CE Electric and Steam Connection Locations for Steam Models 170SModels Electrical Connection Non-CE Installation Pre-Installation InspectionTumbler Enclosure Make-Up Air Exhaust RequirementsLayout VentingIndividual Venting Duct Equivalent Length Diameter Rigid Straight DuctTMB2103N Manifold Venting Duct Pound Mm DuctDuct Pound Station Mm Duct TWO Manifold AssembliesElectrical Requirements