Remote controller
This section is only for KD-AR200.
RM-RK60
S
1• Turns on the unit if pressed when the unit is turned off.
•Turns off the unit if pressed and held until “SEE YOU” appears on the display.
•Drops the volume level in a moment if pressed briefly.
Press again to resume the volume.
2• Searches for stations while listening to the radio.
•
•Skips to the beginning of the next track or goes back to the beginning of the current (or previous) tracks if pressed briefly while listening to a CD.
3Selects the preset stations while listening to the radio.
Each time you press the button, the preset station number increases, and the selected station is tuned in.
4Selects the sound mode
Each time you press the button, the sound mode
5Selects the band while listening to the radio. Each time you press the button, the band changes.
6Selects the source.
Each time you press the button, the source changes.
7Functions the same as the control dial on the main unit.
Note: These buttons are not used for adjusting “DEMO,” “CLOCK H,” “CLOCK M,” “DIMMER,” and “AMP GAIN” (see pages 8, 9 and 19).
ENGLISH
5