Hitachi BD-W85TAE installation instructions Drain hose

How to Install the Washing Machine

■■Make sure that the union nut between the water supply hose and main unit is tightly screwed.

■■Turn the tap on to check if the water supply hose is properly connected before starting. If it is loosely connected, water leakage may occur.

●●Drain hose

■■The drain hose should be placed higher than 60 cm above and not higher than 100 cm above the floor.

If the drain outlet is lower than 60 cm, a joint pipe is necessary (additional part, sold at a specialist outlet). Secure the drain hose to prevent from slipping out from joint pipe.

60~100 cm

Joint pipe

	■■Do not bend, twist, crush or pull out, bend or step on the drain hose.
	Use the hose guide to prevent the drain hose from kinking.
	■■Do not detach the drain hose from the rear panel of the washing
	machine.
d	Drainage into a wash basin (Using the packed-in hose guide) :
	- Secure the drain hose to prevent it from
	slipping out of the wash basin.
	- The wash basin outlet must not be sealed
	by a plug.
	- When water is being pumped out of the
	washing machine, check that the water
	drains away quickly enough.
	Drainage into a siphon :
	- Secure the connection point with 24-40
	mm φ hose clip (Sold at a specialist
	outlet).

27

3WPL090501