How to Install the Washing Machine
Checking after installation
Before the first wash
1.Turn on the water tap and close the washing machine door.
2.Press the Power button to switch power on.
3.Select the Cotton program and press the Start/Pause button.
4.After 5 minutes, check if there is no water leakage from anywhere.
5.Press the Power button to switch power off.
6.Press the Power button again to switch power on.
7.Select the Spin program and press the Start/Pause button.
8.Check if there is no abnormal vibration or sound, and that water is drained out properly.
If any of the following conditions or other abnormalities occur, immediately pull out the power plug to prevent an accident and contact your local service center.
■■The washing machine does not operate when you switch power on. ■■The power cord has cracks.
■■There are abnormal vibrations and sounds during operation. ■■There is a smell of burning.
Select the Cotton program with water temperature at 60ºC setting and allow the unit to wash without clothing. This will remove residues and water that may have been left in the drum during manufacturing.
Customer Service
In case of malfunction of the washing machine, please check these Operating & Installation instructions carefully before you call for repair services.
If you are unable to identify or solve the problem, please contact your local service center.
Before calling, make a note of the model name, serial no. and purchase date of your washing machine. You can find the model name and serial no. on the label attached to the filter cover.
Model Name : BD-W85TAE
Serial No : XXXXXXXX
30
3WPL090501
*
**