Hitachi BD-W75SAE installation instructions Drain hose

d

,

How to Install the Washing Machine

■Make sure that the union nut between the water supply hose and main unit is tightly screwed.

■Turn the tap on to check if the water supply hose is properly connected before starting. If it is loosely connected, water leakage may occur.

●Drain hose

■The drain hose should be placed higher than 60 cm above and not higher than 100 cm above the floor.

If the drain outlet is lower than 60 cm,
a joint pipe is necessary (additional
part, sold at a specialist outlet).
Secure the drain hose to prevent from	60~100 cm
slipping out from joint pipe.
	Joint pipe

■Do not bend, twist, crush or pull out, bend or step on the drain hose. Use the hose guide to prevent the drain hose from kinking.

■Do not detach the drain hose from the rear panel of the washing machine.

Drainage into a wash basin (Using the packed-in hose guide) :

- Secure the drain hose to prevent it from

slipping out of the wash basin.

- The wash basin outlet must not be sealed

by a plug.

- When water is being pumped out of the washing machine, check that the water drains away quickly enough.

Drainage into a siphon :

- Secure the connection point with 24-40 mm φ hose clip (Sold at a specialist outlet).

25

3WPL083851