●The washing machine has stopped with water in the tub, at the end of the “Soak” or of a programme with the “Rinse hold” or “Quiet” option: this is indicated by a flashing zero. The Start/Pause light goes out but the “Door lock” pilot light is still on. The door cannot be opened.
If your laundry is not removed during 10 minutes after the programme has finished, all pilot lights and the display switch off and the energy saving system will be enabled. Only the green Start/Pause light flashes to indicate that the appliance has to be switched off.
●Delay start, a time value indicated in hours and minutes and selected by pressing the delay start button.
The delay time (20 hours max) is displayed for 3 seconds, then the duration of the selected programme reappears.
After you have pressed the Start/Pause button, the countdown is updated every hour, and, for the last hour, every minute.
●An incorrect option selection has been made: this is indicated by the message Err for about 2 seconds when an option incompatible with the current programme is selected.
●An alarm code indicates a fault with the machine (see the relevant chapter).
4 “Spin” button
Press this button repeatedly to change the spin speed if you want your laundry to be spun at a speed different from the one proposed by the washing machine.
Maximum speeds are:
•Cottons, linen: 1600 r.p.m.;
•“Automatic” programme: 1600 r.p.m. ;
•Synthetics and 14 Minute wash: 900 r.p.m.;
•Wool and Handwash: 1000 r.p.m.;
•Delicates and Silk: 700 r.p.m.
By pressing the Spin speed button you can also choose No Spin option «0», Rinse Hold option
« Rinse hold » and Quiet option « Quiet ».
No spin «0» option eliminates all the spin phases and increases the number of rinses for Cottons, Synthetics, Delicates, Silk and Automatic.
Rinse hold position Rinse hold : when you choose this option, the machine will not drain the water of the last rinse, so as not to crease the laundry. The selected option will be displayed.
Quiet position Quiet : when you choose this option, the machine will not drain the water of the last rinse, so as not to crease the laundry. The selected option will be displayed.
As all spinning phases are cancelled, this washing cycle is very quiet and it can be selected at night or in times with a more economical power rate.
On cotton, synthetic, delicates, silk and Automatic programmes the rinses will be performed with more water.
If the Rinse Hold or Quiet option has been selected the “Door lock” light is on, the “Start/Pause” button light goes out and the display shows a flashing «0».
The door cannot be opened because the water must be drained.
To empty out water there are 2 options:
-Select “Drain” programme and press the
“Start/Pause” button: the water is emptied out without spinning.
-Select “Spin” programme. Select the spin speed by means of the relevant button and then press the “Start/Pause” button. The water is emptied out and the laundry is spun at the selected spin speed.
Attention!
Before selecting “Drain” programme or “Spin” programme the selector dial must first be turned to the «Off» position.
13