John Lewis JLWM1604 instruction manual Select the spin speed, No Spin, Rinse hold or Quiet option

Page 18

6.Select the spin speed, “No Spin”, “Rinse hold” or “Quiet” option

Press the “Spin” button repeatedly in order to select the desired spin speed, “No Spin”, “Rinse hold” or “Quiet” option.

Spin

Easy iron

Options

Extra rinse

Quick

Child lock

Spin

Easy iron

Options

Extra rinse

Quick

Child lock

7.Select the “Easy Iron” option

When this option is selected, the laundry will be gently washed and spun to avoid creasing.

The relevant symbol icon will appear in the display.

Spin

Easy iron

Options

Extra rinse

Quick

Child lock

8. Select the desired options

If your laundry is very dirty, it may be advisable to select the “Prewash”, “Stain” or “Intensive” option. If your laundry has heavy stains and it is necessary to prolong the washing time, select the “Stain” option. The special detergent for stains (Stain remover) is

loaded from the compartment marked .

The selected option will be displayed in the relevant rectangle.

Spin

Easy iron

Options

Extra rinse

Quick

Child lock

9. Select the “Delay start”

Before you start the programme, if you wish the start to be delayed, press the “Delay Start” button repeatedly, or keep it pressed, to select the desired delay. The selected delay time value (up to 20 hours) will appear on the display for 3 seconds, then the duration of the programme will appear again.

Delay start

10. Start the programme

Press the “Start/Pause” button. The relevant green light will stop flashing.

If you have chosen a delayed start, the washing machine will begin the countdown.

The display will show the duration of the programme or the selected delay.

Spin

Easy iron

Options

Extra rinse

Quick

Child lock

18

Image 18
Contents Jlwm Spin washing machine Installation Child SafetyUse Ecological hints Maintenance and Cleaning ServiceMaterials marked with the symbol are recyclable Environmental InformationContents Detergent dispenser drawer Child safety featureDescription of the appliance Prewash Main wash Fabric softenerInstallation Technical specificationsInstallation on a Suspended Floor UnpackingPositioning Water drainage PlumbingWater inlet Appliance must be connected to a cold water supplyLevelling Onto a sink outlet spigotInterest of the environment Permanent connection «E» or by the earth symbol or coloured green and yellowElectrical connection Blue- Neutral Brown- LiveDisplay Control panelProgramme selector dial Following pieces of information are shown on the displaySpin button Door cannot be opened because the water must be drainedTo empty out water there are 2 options Easy Iron button Child lockProgramme option buttons Extra rinse buttonCancelling the delayed start Delay start buttonSelecting the delayed start Start/Pause buttonAcoustic Signal Programme informationCompartment marked Measure out the fabric softener Switch the machine onLoad the laundry Measure out the detergentSelect the Easy Iron option Select the Delay startSelect the spin speed, No Spin, Rinse hold or Quiet option Select the desired optionsEnd of programme How to change an option or a programme during its cycleHow to interrupt a programme Leave the door ajar in order to air the washing machineSheet Hints & tips on washing1000g = 1 kg Bath robeWash care symbols Important NotesProgramme Consumptions Fabrics Type of laundry Only at a temperature of 40C or higherWashing programmes WaterDescription Off / ResetProgramme Consumptions SoakMaintenance and cleaning Remove any objects from the pump impeller by rotating it Cleaning the water inlet filterEmergency emptying out Screw the pump cover fully Close the pump doorSomething not working Door will not open Machine vibrates whenSpinning Light has gone out132 972 22/07