John Lewis JLWM1604 Load the laundry, Measure out the fabric softener, Measure out the detergent

Page 17

Using the washing machine

Before the first wash, we recommend that you run a cotton cycle at 90°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.

WASHING 7 KG OF WHITE COTTON AT 90°C

Suppose you have 7 kg of laundry to wash. It is white cotton and is suitable for high temperature washing.

1.Load the laundry

Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.

3.Measure out the fabric softener

If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.

SM003

Close the drawer gently.

P0004

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into

the main wash compartment .

If you wish to carry out the prewash, a soak programme or a stain phase, pour detergent or stain remover into the appropriate compartment marked .

SM002

SM002

Important!

Do not use normal detergent for the “Stain” option, always use a STAIN remover.

4. Switch the machine on

Turn the selector dial to any programme to switch the machine on. The Start/Pause light starts to flash and the display shows the duration of the selected programme.

To switch the appliance off turn it to “Off”.

14 Minute wash

Off

90°

 

Spin

 

Economy 60°

Start/Pause

Drain

 

60°

Rinse

 

Economy 40°

 

Soak

 

40°

 

30°

 

30°

 

Hand wash

 

60°

 

Silk

 

40°

 

Delicates 30°

 

30°

 

Delicates 40°

 

Automatic

 

5.Select the desired programme/temperature

Turn the selector dial to the desired position (Cottons 90° in this case).

The display will show the duration of the selected programme, calculated on the basis of the maximum load for each type of fabric. The Start/Pause button light will start flashing.

If your laundry needs a soak time, turn the programme selector dial to “Soak” and then, before starting a washing cycle, drain the water as described in the “Soak” paragraph.

17

Image 17
Contents Jlwm Spin washing machine Use InstallationChild Safety Materials marked with the symbol are recyclable Maintenance and Cleaning ServiceEcological hints Environmental InformationContents Description of the appliance Child safety featureDetergent dispenser drawer Prewash Main wash Fabric softenerTechnical specifications InstallationPositioning Installation on a Suspended FloorUnpacking Water inlet PlumbingWater drainage Appliance must be connected to a cold water supplyOnto a sink outlet spigot LevellingInterest of the environment Electrical connection «E» or by the earth symbol or coloured green and yellowPermanent connection Blue- Neutral Brown- LiveProgramme selector dial Control panelDisplay Following pieces of information are shown on the displayTo empty out water there are 2 options Spin buttonDoor cannot be opened because the water must be drained Programme option buttons Child lockEasy Iron button Extra rinse buttonSelecting the delayed start Delay start buttonCancelling the delayed start Start/Pause buttonCompartment marked Acoustic SignalProgramme information Load the laundry Switch the machine onMeasure out the fabric softener Measure out the detergentSelect the spin speed, No Spin, Rinse hold or Quiet option Select the Delay startSelect the Easy Iron option Select the desired optionsHow to interrupt a programme How to change an option or a programme during its cycleEnd of programme Leave the door ajar in order to air the washing machine1000g = 1 kg Hints & tips on washingSheet Bath robeImportant Notes Wash care symbolsWashing programmes Only at a temperature of 40C or higherProgramme Consumptions Fabrics Type of laundry WaterProgramme Consumptions Off / ResetDescription SoakMaintenance and cleaning Emergency emptying out Cleaning the water inlet filterRemove any objects from the pump impeller by rotating it Screw the pump cover fully Close the pump doorSomething not working Spinning Machine vibrates whenDoor will not open Light has gone out22/07 132 972