18MACHINE INFORMATION
CARE AND CLEANING
TO REMOVE FABRIC SOFTENER DISPENSER CUP
Push cup through dispenser with thumb
WHEN YOU HAVE FINISHED
•Turn off the faucets to prevent any chance of flooding should a hose burst.
•Unplug the machine from the wall socket.
CLEANING YOUR ECOSMART
•Clean with a soft damp cloth and wipe dry. Do not use chemical or scouring cleaners as they can damage the paint and plastic surfaces.
•You can remove the lid for cleaning. Open the lid fully, hold one side with one hand and gently tap the other side with an upward motion.
To replace the lid, hold the lid vertically and align both hinges before pushing down firmly.
•To remove the agitator for cleaning, unscrew the nut down the center of the agitator by turning
CAUTION:The agitator must be fully pushed on to the shaft when refitting.Tighten the nut firmly by hand. Ensure the agitator is not loose.
CLEANING THE FABRIC SOFTENER DISPENSER
When using fabric softener, rinse your dispenser at the end of each wash, using warm soapy water.
•Separate the cup from the dispenser body by pushing downwards on the base of the cup.
CLEANING THE INSIDE OF YOUR ECOSMART
Your ecosmart is equipped with a special cleaning cycle to help prevent those nasty residues that can build up inside washers.
The Cleaning Cycle
To get into the cleaning cycle:
1.Press POWER to turn the machine on.
2.Select the PERMANENT PRESS cycle.
3.Simultaneously press the wash temp up and down buttons and hold down. The machine will beep and the wash temp LED will flick up to hot.