16CHANGING PRE-SET OPTIONS
OUT OF BALANCE RECOVERY ROUTINE
OUT OF BALANCE RECOVERY OPTIONS
HEAVY DUTY
light on = automatic recovery
HEAVY DUTY
light off = machine stops
AUTO WATER FILL
LEVEL
AUTO WATER LEVEL ADJUSTMENT
Light on |
|
|
FAVORITE | = | less water |
PERM. PRESS | = | less water |
WOOL | = | factory |
|
| setting |
DELICATE | = | more water |
REGULAR | = | more water |
When your ecosmart is spinning it can sense if the wash load is out of balance and will stop and retry spinning up to 3 times. If the machine still senses an unbalanced load there are two options the machine can take.
•Automatic Recovery Option:
Your ecosmart will try to automatically correct the out of balance load. It will fill with water and agitate to redistribute the load before trying to spin up again.
•Machine Stops Option:
Your ecosmart will stop, giving a short burst of beeps every five seconds and the RINSE or SPIN light will flash.You must redistribute the load more evenly yourself. (Use this option if you wish to conserve water.)
1.Enter the Option Adjustment Mode.
2.Use the HEAVY DUTY button to select the Out of Balance recovery option you prefer.
3.Press Power to store your selection.
If you are not satisfied with the level that your ecosmart fills to on AUTO WATER LEVEL, you can increase or decrease the fill level that Auto will select.
Note: If you feel there is not enough water for the load, we recommend you check by pausing the machine and pushing the clothes down to see how much spare water is at the bottom of the wash basket. Clothes often float and your ecosmart can sense the water under the clothes.
1.Enter the Option Adjustment Mode.
2.Use the CYCLE buttons to increase or decrease the amount of water selected.
3.Press POWER to store your selection.