How to use washer
■Dry
•Cold water tap must be left on during drying cycles.
•This
•For most even drying, make sure all articles in the clothes load are similar in material and thickness.
•Do not overload dryer by stuffing too many articles into drum. Items must be able to tumble freely
•If you open door and remove load before dryer has finished its cycle, remember to press the Start/Pause button.
•By turning the DRY dial, you can select : Cupboard Dry - Eco Dry - 30 - 60 - 120 - Low Temp. - Iron Dry
•After the end of dry, “ 
” is displayed. By pressing the “Start/Pause” button the program can be ended. If you not press the “Start/Pause” button, the program is ended after about 4 hours. “ 
” Cooling Cycle.
1.Drying Automatic guide
•Use your Automatic Cycles to dry most loads. Electronic sensors measures the temperature of the exhaust to increase or decrease drying temperatures for faster reaction time and tighter temperature control.
•Recommend Automatic drying course as a kind of clothes.
a)Low Temp. : For Synthetics select
b)Iron Dry : If you want to iron clothes
c)Cupboard Dry : For Cottons select
d)Eco Dry : A special cycle to reduce water usage during the dry cycle.
e)Time (30/60/120 minutes)
-30 min. : Cotton/Towel 0.5 kg
-60 min. : Cotton/Towel 1.5 kg
-120 min. : Cotton/Towel 3.0 kg
NOTE
•The estimated drying time varies from the actual drying time with an Automatic. The type of fabric, size of the load, and the dryness selected affect drying time.
•The last 11 minutes of dryinng time, A sensor(Thermistor) detects clothes drying conditions.
When the dryness is low, cycle time will be added by max. 10 mins with “11” mins remaining window display.
27