SETTLING YOUR CYCLE
SELECTOR (TIMER) CONTROL
Use this control to choose the agitation time and to start the washer.
•For heavy soil and sturdy fabrics, use the full time.
•For light soil and delicate fabrics, use less time.
PERMANENT PRESS
The PERMANENT PRESS Cycle includes a load cooling process that reduces wrinkling compared to other cycles.
You can select up to 10 minutes of wash time.
NOTE: When the timer reaches PAUSE,
the washer will drain and pause for no more than two minutes while some of
the wash water is drained and replaced with rinse water.
ULTRA CLEAN
Use this cycle for most loads to get between 4 and 14 minutes of wash time.
RINSE
SHORT-6
10
ULTRA CLEAN
,SUPER
o_,_
PREWASH
SOAK
Use this cycle to get up to 4 minutes
of agitation to help remove heavy soils and stains that need pretreatment.
PREWASH Cycle should be followed
PREWASH
by an ULTRA CLEAN or PERMANENT PRESS Cycle with additional detergent.
SOAK
SOAK Cycle features 4 minutes of agitation followed by an unlimited soak time to help remove heavy soils and
stains that need pretreatment. You will need to reset the washer to a SPIN
setting to remove water. SOAK Cycle should be followed by an ULTRA CLEAN, PERMANENT PRESS, or PREWASH Cycle with additional detergent.
NOTE: We do not recommend hot water for soaking. It may set some stains.
SPIN
OFF
2ND RINSE
OFF
lo
,PERMANENT 16 PRESS
PUSH & TURN CLOCKWISE TO SET | PULL TO START | PUSH TO STOP |
23