Oven Control Functions, Temperature conversion

Oven Control Functions

READ TH E iNSTRUCTiONS CAREFU LLY BEFORE USING THE OVEN For satisfactory use of your oven become familiar with the various pad functions of the oven as described below

BROIL PAD-- Used to select the variable broil function

CLOCK SET

UP and DOWN ARROW PADS-- Used along
with the function	pads to	select	oven	FEATUREINDICATOR
temperature time	of day	clean	time and	LIGHTS-- These light to
minutetimer				show which feature is in

PAD--		Used	_
to set		the	\
time of day.
TIMERON/OFF			"_	0
PADUsedtoset			....
or cancel		the minute		..............
timer	The	minute
timer	does not start
or stop cooking
Also			Se/li	3<a_<
TIMER ON/OFF pad
is used to set the
Continuous		Sake
feature.

	I
	_/
	J
_	.....
	i

_ use

BAKEPAD--Usedto

seectthebakefuncton

CLEAR/OFF PAD-- Used

to clear any function previously entered

except the time of day and minute timer. Press

CLEAR/OFF to stop cooking. Also the CLEAR/

SELECT SELFCLEAN

PAD-- Used to select the

Self Cleaning cycle A 2 3 or 4 hour Self Clean

time may be selected

OVEN PREHEAT & DOOR LOCKED LIGHTS*-- The OVEN light will glow each time the oven turns on to maintain the set oven

temperature The PREHEAT light will glow when the oven is first set to operate or if the desired temperature is reset higher than the actual oven temperature The DOOR LOCKED light will flash when the oven door locks and unlocks or when using the Self Clean cycle or the oven door lockout is activated The indicator light will glow constantly after the door locks

OFF pad is used to activate Oven Lockout

setting.

*Note: The OVEN indicator light on the electronic display wi!l turn ON and OFF: when using the Bake feature and during preheat. This is norma I and indicates that the oven is cYcling to maintain the selected baking temperature, When the

preheat indicator light turns OFF, your oven is ready.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1. Press B_o_....

appears in the display.

2.Press and hold the J%. until "Hr'appears in the display.

3.Press and hold B,o,until °F or °C appears in the display.

4.Press the A or V to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.