Self-Cleaning (cont'd)
Starting the Select Self=Clean Cycle
For satisfactory results, use a 2 hour
To Set the Controls for a Self=Clean Cycle:
1.Be sure the clock shows the correct time of day.
2.Press @. " "appears in the display.
3.Press the A or V once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press V.
"2:00" appears in the display or to select a 4 hour cycle press J_.. "4:00" appears in the display.
As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).
,"CLn" will appear in the display during the
When the Self=Clean Cycle is complete:
1.The time of day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow.
2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
3. If "End" is in the display and the Select Clean indicator light remains ON, press _. The time of day will appear in the
display.
NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.
Stopping or Interrupting a Select Self=Cleaning Cycle
If it becomes necessary to stop or interrupt a
1.Press _.
2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
3.Restart the
To avoid possible burns use care when opening the oven door after the
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the
15