Kenmore 134966700 dimensions Full Size Tumble Action Washers

Page 1

®

Full Size Tumble Action Washers

Before beginning installation, carefully read these instructions. This will simpfify the

installation and ensure the washer is installed correctly and safely. Leave these instructions

near the washer after installation for future reference.

NOTE: The electrical service to the washer must conform with local codes and ordinances and the latest edition of the National Electrical Code, ANS!/NFPA 70.

For your safety the information in this manual must be followed to minimize the risk

of fire or explosion or to prevent property damage, personal injury or loss of life.

-Do not store or use gasoline or other flammable vapors and liquid in the vicinity of this or any other appliance.

=WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Clear the room, building or area of all occupants.

Immediately call your gas supplier from a neighbor's phone. Follow the gas suppliers instructions.

If you cannot reach your gas supplier, call the fire department.

Contents

S UBJECT

PAGE

Pre-lnstallation Requirements

2

Electrical Requirements

2

Grounding Requirements

2

Water Supply Requirements

2

Drain Requirements

2

Rough-In Dimensions

3

Location Of Your Washer

4

Unpacking

4-5

Installation

5-6

Replacement Parts

6

Installation and service must be performed by a qualified installer, service agency or the gas supplier.

Sears, Roebuck and Co.,

Hoffman Estates, IL 60179 U.S.A.

Printed in U.S.A.

_N 134966700(0708)

Image 1
Contents Full Size Tumble Action Washers Electrical Requirements PRE-INSTALLAT!ON RequirementsGrounding Requirements Water Supply RequirementsInchescm ROUGH-INDIMENSIONSMinimum Installation Clearances Do not Install Your WasherLocation of Your Washer UnpackingHose clips Metal P clampZeve/ing the Washer Washer ConnectionsCable Tie Replacement Parts