Kenmore 3950144 owner manual Alternate Locations Standpipe and Floor Drain Systems

ALTERNATE LOCATIONS-

STANDPIPE AND FLOOR DRAIN SYSTEMS

Siphon break: Must be purchased separately. See chart below.

Standpipe drain system: Needs a two-inch minimum diameter standpipe with minimum carry-away capacity of 17 gallons per minute. Top of standpipe must be at least 39 inches above floor and no higher than 96 inches from bottom of washer.

If you have:

Laundry tub or standpipe taller than 96 inches

1-inch diameter standpipe

Overhead sewer

Floor drain

Floor drain system: Requires a siphon break, see chart below. A minimum carry- away capacity of 17 gallons per minute is required.

You will need to buy:

Sump pump system

(if not already available)

2-inch diameter to 1-inch diameter standpipe adapter, Part No. 3363920

Standard 20 gallon, 39-inch tall drain tub or utility sink and sump pump (available from local plumbing suppliers)

Siphon break, Part No. 285320; additional drain hose, Part No. 3357090; and Connector Kit, Part No. 285442

Parts listed are available from your local Sears store or Sears Service Center. Call 1-800-366-PART (1-800-366-7278).

I2