Kenmore 3950144 owner manual Review Installation, Final Steps

REVIEW INSTALLATION

Take a few minutes to complete

this checklist, it will help assure you that you have a proper installation

and increase your satisfaction with your Kenmore washer,

[] Check electrical requirements.

Be sure you have correct electrical

supply and recommended grounding method.

[] Check that you have:

•All the tools you started with.

•Removed all packaging materials.

•Removed shipping strap with three cotter pins.

•Installed all parts listed on pages 6-8.

[] Check that:

•The washer is level.

•The nuts on the front legs are tight.

[] Check that the water faucets are turned on.

FINAL

STEPS

[]

Plug

power

supply

cord

into

[] Take

a

few

minutes

and

read

the

grounded

outlet.

Operating

instructions

(pages

20-28)

to fully

understand

your

new

washer.

[]

Remove the blue

protective film on

Then,

start

the washer

and allow it to

the

console

and any tape

remaining

complete

the ULTRA CLEAN

Cycle.

on washer.

I9