Kenmore 134190400 (0209) manual Operating, Washer does not start, Wash load too wet after spin

Page 12

OCCURRENCE

OPERATING

Washer does not start.

POSSIBLE CAUSE I SOLUTION

Electrical power cord may not be plugged in or connection may be loose, Make sure plug fits tightly in wall outlet.

House fuse blown, circuit breaker tripped, or a power outage has occurred. Reset circuit breaker or replace fuse. Do not increase fuse capacity. If problem is a circuit overload, have it corrected by a qualified electrician. If problem is a power outage, call local electric company,

Water supply faucets are not turned on. Turn on water supply faucets.

Cycle selector is not in correct position. Move indicator clockwise slightly. Pull out knob.

Motor is overheated. Washer motor will stop if it becomes overheated. It will automatically restart after a cool down period of up to 30 minutes (if washer has not been manually turned off).

Dispenser drawer is not completely closed. Close dispenser drawer.

Washerwon't spin,

Residue left in drum.

WATER

Water collects in bleach and fabric softener compartments,

Wash load too wet after spin.

Water does not enter washer or it entersslowly,

- Washer door is not completely closed. Close door completely.

Dispenser drawer is not completely closed. Close dispenser drawer.

Load is too small. Add 1 or 2 similar items to help balance the toad.

Heavily soiled items, Wipe drum with a nonabrasive household cleanser, then rinse. Shake or brush excess dirt and sand from items before washing.

This is a result of the siphoning action and is part of the normal operation of

the washer. Water may be removed by removing the dispenser drawer (see Page 10, Figures 1 and 2) and draining water into the empty drum or sink.

Washer isoverloaded. Do not overload washer. See Washing Procedures,

Load is too small. Add 1 or 2 similar items to help balance the load.

Load is out of balance. Rearrange load to allow proper spinning.

Drain hose is kinked. Straighten drain hose.

Water supply is not adequate in area. Check another faucet in the house. Wait until water supply and pressure increase.

Water supply faucets are not completely open. Fully open hot and cold faucets.

Water is being used elsewhere in the house. Water pressure must be at least 30 psi (260 kPa). Avoid running water elsewhere while washer is filling.

Water inlet hoseS_are kinked. Straighten hoses.

Warm or hot water is not hot enough.

Water in washer does not drain or drains slowly.

Waterleaks.

Incorrectwashandrinse temperatures,

Water is entering washer but tub does not fill.

Hot water heater is set too low or is a distance from washer. Measure hot water temperature at nearby faucet with candy or meat thermometer. Water temperature should be at least 120°F (49°C). Adjust water heater as necessary.

Hot water is being used elsewhere in the house. Avoid using hot water elsewhere before or during washer use. There may not be enough hot water available for proper cleaning. If problem persists, your hot water system may be unable to support more than 1 use at a time.

. Drain hose is kinked or clogged. Clean and straighten the drain hose.

Maximum standpipe height is 8'(2.4 m).

Fill hose connection is loose at faucet or washer. Check and tighten hose connections, Install rubber sealing washers provided.

House drain pipes are clogged. Unclog drain pipes. Contact plumber if necessary.

Oversudsing. Use less detergent.

. Hot and cold water hoses are connected to wrong supply faucets. Connect hot water hose to hot water faucet and cold water hose to cold water faucet.

Drainhosestandpipeisincorrectheight. Standpipemustbeaminimumof 23.6" (60 cm) high to prevent siphoning. See INSTALLATION INSTRUCTIONS.

12

Image 12
Contents Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A 134190400Tumble Action Washer Warranty ContentsProduct Record Important Safety Instructions Read all instructions before using this washerPrevent Fire Protect ChildrenImportant Safety Instructions Do not underanyOmthis plug, j CorrectWashing Procedures Pretreat stains and heavy soilAdd laundry load to washer Opening and Closing the Dispenser Drawer Liquid BleachDetergent Fabric SoftenerSafe Stain Removal Procedures Remove items when the cycle is completedStain Removal Washer will fill and tumbleStain Removal For successful stain removalCommon Washing Problems Problem Possible Causes Solutions Preventive MeasuresCare and Cleaning Cleaning the Dispenser Drawer AreaOutside InsideAvoid Service Checklist Follow Winterizing Instructions for cold Weather careWinterizing Instructions Operating Washer does not startWash load too wet after spin Indice Registro de productoRestriccibn de la garantia Servicio bajo la garantiaInstrucciones importantes para la seguridad PedestalInstrucciones Importantes para la Evite LesionesManera Correcta Procedimientos para el lavado Divida la ropa en grupos que puedan lavarse juntosPrepare las prendas para el lavado Ponga la carga de ropa en la lavadoraPara Abrir Y Cerrar EL Cajon Dispensador DetergenteBlanqueador Liquido No vierta el suavizante directamente Sobre laProcedimientos para el = Remover las manchasPonga la lavadora en marcha Saque las prendas cuando el ciclo haya terminadoMancha Pare eliminar bien las manchasProblemas de lavado communes Problema Causas PosiblesSoluciones Medidas Preventivas Cuidado y limpieza Limpieza del cajOn dispensadorEvitar Ilamadas de servicio Cuidado y limpiezaInvierno Instrucciones de preparacion para el invierno ContinuacionFuncionamiento Compartimientos para elElaguaentraenlalavadoraperola PartsDirect

134190400 (0209) specifications

The Kenmore 134190400 (0209) is a versatile and highly efficient appliance that stands out in the world of modern refrigeration. Designed with the consumer in mind, this appliance caters to various kitchen needs, ensuring food stays fresh and organized while enhancing the aesthetic appeal of any kitchen.

One of the main features of the Kenmore 134190400 is its large capacity, providing ample storage space for groceries, beverages, and leftovers. This fridge comes equipped with adjustable shelves that allow users to customize the interior layout, making it easier to store bulky items or multiple small containers. The spill-proof shelves are designed to contain leaks and spills, simplifying the cleanup process.

The cooling technology integrated into the Kenmore 134190400 is impressive, utilizing a state-of-the-art cooling system that maintains uniform temperatures throughout the refrigerator. This allows for optimal food preservation, reducing the chances of spoilage or freezing. Additionally, the refrigerator features an energy-efficient design that not only helps in reducing energy bills but also contributes to a smaller environmental footprint.

Another noteworthy characteristic of this model is its advanced humidity-controlled crisper drawers. These drawers are designed to maintain the ideal humidity levels for fruits and vegetables, allowing them to stay fresher for longer periods. The crispers also include a separate compartment for delicate produce, ensuring that all items are stored under conditions that promote longevity.

The Kenmore 134190400 is equipped with a user-friendly LED display and intuitive controls, making it easy for anyone to adjust settings or monitor interior conditions. The appliance also features a door alarm that alerts users when the refrigerator door is left ajar, providing added peace of mind, especially in busy households.

Furthermore, this model includes an external water and ice dispenser, delivering convenience directly from the front of the appliance. It eliminates the need for constantly opening the door, which helps retain cold air and maintain optimal temperatures inside.

Overall, the Kenmore 134190400 (0209) is an excellent choice for anyone looking to upgrade their home refrigeration. Combining practical features, advanced technology, and efficient cooling, this refrigerator is designed to meet the demands of modern living while ensuring food safety and freshness.