INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather required tools and parts before starting installation.
Tools needed: |
|
| Parts needed: (Not supplied with washer) | ||
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable or open end Level wrench 9/16" (14 mm)
4" min
(102 mm)
Wood block |
| Ruler or measuring tape |
Inlet hoses with flat washers
To order, please refer to the phone number or website on back page of your Washer User Instructions.
n8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
n8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
n8212646RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
n8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM (2 pack)
n8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
n8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space saving 90° elbow,
n8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space saving 90° elbow,
Pliers that open to 19⁄16" (39.5 mm)
Optional tools:
FlashlightBucket
Parts supplied:
NOTE: All parts supplied for installation are in washer basket.
Alternate parts: (Not supplied with washer)
Your installation may require additional parts. To order, please refer to the phone number or website on the back page of your Washer User Instructions.
If you have: | You will need: |
Overhead sewer | Standard 20 gal. (76 L) 39" |
| (991 mm) tall drain tub or utility |
| sink, sump pump, and connectors |
| (available from local suppliers) |
Short drain hose | Drain Extension Kit Part Number 49022 |
1" (25 mm) | 2" (51 mm) diameter to 1" (25 mm) diameter |
diameter standpipe | Standpipe Adapter Kit, Part Number 40923 |
| Connector Kit, Part Number 285835 |
Lint clogged drain | Drain protector, Part Number 376031 |
Floor drain | Siphon Break Kit, Part Number 280129A |
| Drain Hose, Part Number 285702 |
| Connector Kit, Part Number 285835 |
LOCATION REQUIREMENTS
Beaded Tie Strap | Front leveling feet with |
| jam nuts (2) |
|
|
|
|
Drain hose form
Select proper location for your washer to improve performance and minimize noise and possible “washer walk”. Install your washer in a basement, laundry room, closet, or recessed area.
27" | 251/2" |
(686 mm) | (648 mm) |
|
42"
(1067 mm)
2