8. Select cycle
Turn cycle knob to choose your wash cycle. Estimated
Time Remaining will light up with a cycle time. You
may notice time adjusting during the cycle. This is normal.
If you do not want to begin a cycle immediately, you may choose the DELAY WASH option.
To choose a delay time:
1.Press DELAY WASH button to select desired delay time.
2.Press START/PAUSE to set the delay. The delay countdown has started when the START/PAUSE light stops blinking.
To cancel delaying a cycle:
1.Press START/PAUSE again to begin a wash cycle immediately.
IMPORTANT: When delaying a cycle, use liquid HE detergent only in the dispenser. Powdered detergents may absorb moisture from a previous cycle and clump before the wash cycle begins.
9. Select cycle modifiers, if desired
Once you select a cycle, the default settings for that cycle will be lit. Press the cycle modifiers buttons to change the Soil Level, Spin Speed, and Wash Temp, if desired. Not all settings are available with all cycles.
NOTE: Always read and follow fabric care labels instructions to avoid damage to your garments.
Wash Temp | Suggested Fabrics | |
|
| |
Hot |
| |
Some cold water is added | Whites and pastels | |
to save energy. This will be | Durable garments | |
cooler than your hot water | ||
Heavy soils | ||
heater setting. | ||
| ||
|
| |
Warm |
| |
Some cold water will be | Bright colors | |
added, so this may be cooler | Moderate to light soils | |
than what your previous | ||
| ||
washer provided. |
| |
|
| |
Cool |
| |
Warm water is added to assist | Dark colors that | |
in soil removal and to help | bleed or fade | |
dissolve detergents. | Light soils | |
| ||
|
| |
Cold |
| |
Warm water may be added to | Dark colors that | |
assist in soil removal and to | bleed or fade | |
help dissolve detergents. | Light soils | |
| ||
|
|
10. Select cycle options
Select any other cycle options you may wish to add, if not previously set. Some cycles will automatically add certain options such as Extra Rinse. These may be turned off,
if desired.
NOTE: Not all options are available with all cycles.
11. Press START/PAUSE to begin wash cycle
Press the START/PAUSE button to start the wash cycle. When the cycle has finished, the DONE indicator will light and the end of cycle signal will sound (if set). Promptly remove garments when cycle is done to avoid odor, reduce wrinkling, and rusting of metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE; the lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at high speed. Then close lid and press START/PAUSE again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump out.
10