Whirlpool W10038070 ToolsandParts, LocationRequirements, Parts supplied, Alternate Parts

Page 10

INSTALLATION REQUIREMENTS

ToolsandParts

Gather the required tools and parts before starting installation. The parts supplied are in the washer basket.

Tools needed for connecting the drain hose and water inlet hoses:

■ Pliers that open to

■ Flashlight (optional)

3.95 cm (1⁹⁄₁₆")

■Flat-blade screwdriver

Parts supplied:

ABCD

E

F

G

H

A. Water inlet hose (2)

E. Large flat washer (4)

B. Drain hose form

 

F. Small flat washer (2)

C. Drain hose extension

G. Inlet hose adapter

D. Drain hose coupling

H. Hose clamp (2)

 

Alternate Parts

Your installation may require additional parts. For information on ordering, please refer to the toll-free phone numbers on the front page of the Washer User Instructions.

If You Have:

You Will Need to Buy:

 

 

Laundry tub or

Sump pump system (if not already

standpipe taller

available)

than 2.4 m (96")

 

 

 

Overhead sewer

Standard 76 L (20 gal.) 99 cm (39") tall

 

drain tub or utility sink, sump pump and

 

connectors (available from local

 

plumbing suppliers)

 

 

Floor drain

Siphon break kit, Part Number 280129;

 

additional drain hose,

 

Part Number 3357090

 

 

Water faucets

2 longer water fill hoses:

beyond reach of fill

1.8 m (6 ft) Part Number 76314,

hoses

3.0 m (10 ft) Part Number 350008

 

 

Drain hose too

Drain hose kit, Part Number 280131

short

 

 

 

Lint clogged drain

Drain protector, Part Number

Tools needed for securing the drain hose and leveling the washer:

■

Adjustable or open end

■

Wood block

 

wrench 14 mm (⁹⁄₁₆")

■

Ruler or measuring tape

 

Level

■

 

 

Parts supplied:

AB

A. Beaded tie strap

B. Front leveling feet with nuts (2)

LocationRequirements

Selecting the proper location for your washer improves performance and minimizes noise and possible washer “walk.”

Your washer can be installed in a basement, laundry room, closet, or recessed area. See “Drain System.”

IMPORTANT: Do not install or store the washer where it will be exposed to the weather.

Proper installation is your responsibility.

You will need:

■A water heater set to deliver 49˚C (120˚F) water to the washer.

■An earthed electrical outlet located within 1.2 m (4 ft) of where the power cord is attached to the back of the washer. See “Electrical Requirements.”

■Hot and cold water faucets located within 90 cm (3 ft) of the hot and cold water fill valves, and water pressure of 34.5- 690 kPa (5-100 psi). Washers with triple dispensers require 138-690 kPa (20-100 psi) for best performance.

■A level floor with a maximum slope of 2.5 cm (1") under entire washer. Installing the washer on carpeting is not recommended. Ventilation openings in the base must not be obstructed by carpet.

■A sturdy floor to support the washer weight (washer, water and load) of 143 kg (315 lbs).

Do not store or operate your washer in temperatures at or below 0˚C (32˚F). Some water can remain in the washer and can cause damage in low temperatures. See “Washer Care” in the Washer User Instructions for winterizing information.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Washer Installation Instructions Efgh 35.6 cm 310 cm Page Page Page ABC Page Washer Safety Parts supplied ToolsandPartsLocationRequirements Alternate PartsDrainSystem ElectricalRequirementsBeforeYouStart Straight power cordRemoveShippingMaterials Remove drain hose from washer cabinet Looped power cordConnectDrainHose To keep drain water from going back into the washerConnecttheInletHoses LeveltheWasher Install the Front Leveling FeetSecuretheDrainHose Steps in Final LocationCompleteInstallation

W10038070 specifications

The Whirlpool W10038070 is a highly versatile and efficient refrigerator water filter designed to provide clean and purified water for you and your family. This filter is compatible with a range of Whirlpool refrigerator models, ensuring that users have access to safe drinking water directly from their appliances.

One of the standout features of the W10038070 is its advanced filtration technology, which effectively reduces common contaminants found in tap water, such as chlorine taste and odor, lead, and other harmful impurities. This ensures that the water dispensed from your refrigerator is not only refreshing but also healthier for consumption. The filter employs activated carbon technology, known for its ability to absorb contaminants, making every glass of water crisp and clean.

The installation process for the W10038070 is designed to be user-friendly. It features a no-tools-required, push-fit design that allows homeowners to easily replace the filter in minutes without the need for professional assistance. This convenience is a significant advantage for busy households, eliminating the hassle often associated with water filter replacements.

In terms of specification, the W10038070 has a lifespan of approximately six months or 200 gallons of filtered water, depending on usage and water quality. This longevity makes it a cost-effective choice for maintaining water quality without frequent replacements. Additionally, the filter is designed to maintain optimal water flow rate while delivering quality filtration.

Whirlpool stands behind the quality of its products, and the W10038070 is no exception. It is certified for safety and performance by NSF International, which guarantees that the filter meets rigorous safety standards. This certification provides peace of mind to consumers, ensuring that their families are drinking safe, treated water.

In summary, the Whirlpool W10038070 combines convenience, efficiency, and reliability. With its advanced filtration capabilities, easy installation, and long-lasting performance, it is an essential accessory for any Whirlpool refrigerator, significantly enhancing the quality of water available in your home. Whether you're filling a glass of water or making ice, the W10038070 ensures that you are enjoying the purest taste with every sip.
Top Page Image Contents