Whirlpool W10038070 installation instructions CompleteInstallation

Page 16

4.If the washer is not level, move the washer out slightly, tip back, prop up the front of the washer with the wood block and adjust the feet up or down as necessary by twisting the feet. Turn the feet clockwise to raise the washer or counterclockwise to lower the washer. Repeat steps

1 through 4 until washer is level.

5.After the washer is in its final location and level, use a 14 mm or ⁹⁄₁₆" open-end wrench to turn the nuts counterclockwise on the feet tightly against the washer cabinet.

IMPORTANT: If the nuts are not tight against the washer cabinet, the washer may vibrate.

CompleteInstallation

1.Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended earthing method. See “Electrical Requirements.”

2.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

3.Check that you have all of your tools.

4.Check that the yellow shipping strap was completely removed from the lower back of the washer.

5.Dispose of/recycle all packaging materials.

6.Check that the water faucets are on.

7.Check for leaks around faucets and inlet hoses.

WARNING

Electrical Shock Hazard

Electrically earth this appliance.

Do not use an extension cord or an electrical portable outlet device.

Failure to follow these instructions can result in death, fire, or electrical shock.

8.Plug into an earthed outlet.

9.Remove the protective film on the console and any tape remaining on the washer.

10.Read “Washer Use” in the Washer User Instructions.

11. To test and to clean your washer, measure ¹ of the normal recommended amount of powdered or liquid detergent and pour it into the washer basket or detergent dispenser (on some models). Close the lid. Select any cycle, and then pull the cycle control knob out to start the washer. Allow it to complete one whole cycle.

 

4/06

W10038070

Printed in U.S.A.

© 2006 Whirlpool Corporation.

Benton Harbor, Michigan 49022

Image 16
Contents Washer Installation Instructions Efgh 35.6 cm 310 cm Page Page Page ABC Page Washer Safety ToolsandParts LocationRequirementsParts supplied Alternate PartsDrainSystem ElectricalRequirementsBeforeYouStart Straight power cordRemoveShippingMaterials Looped power cord ConnectDrainHoseRemove drain hose from washer cabinet To keep drain water from going back into the washerConnecttheInletHoses Install the Front Leveling Feet SecuretheDrainHoseLeveltheWasher Steps in Final LocationCompleteInstallation

W10038070 specifications

The Whirlpool W10038070 is a highly versatile and efficient refrigerator water filter designed to provide clean and purified water for you and your family. This filter is compatible with a range of Whirlpool refrigerator models, ensuring that users have access to safe drinking water directly from their appliances.

One of the standout features of the W10038070 is its advanced filtration technology, which effectively reduces common contaminants found in tap water, such as chlorine taste and odor, lead, and other harmful impurities. This ensures that the water dispensed from your refrigerator is not only refreshing but also healthier for consumption. The filter employs activated carbon technology, known for its ability to absorb contaminants, making every glass of water crisp and clean.

The installation process for the W10038070 is designed to be user-friendly. It features a no-tools-required, push-fit design that allows homeowners to easily replace the filter in minutes without the need for professional assistance. This convenience is a significant advantage for busy households, eliminating the hassle often associated with water filter replacements.

In terms of specification, the W10038070 has a lifespan of approximately six months or 200 gallons of filtered water, depending on usage and water quality. This longevity makes it a cost-effective choice for maintaining water quality without frequent replacements. Additionally, the filter is designed to maintain optimal water flow rate while delivering quality filtration.

Whirlpool stands behind the quality of its products, and the W10038070 is no exception. It is certified for safety and performance by NSF International, which guarantees that the filter meets rigorous safety standards. This certification provides peace of mind to consumers, ensuring that their families are drinking safe, treated water.

In summary, the Whirlpool W10038070 combines convenience, efficiency, and reliability. With its advanced filtration capabilities, easy installation, and long-lasting performance, it is an essential accessory for any Whirlpool refrigerator, significantly enhancing the quality of water available in your home. Whether you're filling a glass of water or making ice, the W10038070 ensures that you are enjoying the purest taste with every sip.