Whirlpool W10038070 SecuretheDrainHose, LeveltheWasher, Install the Front Leveling Feet

Page 15

SecuretheDrainHose

1.Remove the shipping strap from the power cord. Drape the power cord over the console.

2.Remove any cardboard used to move washer.

Beaded tie strap

3.Wrap the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap. Push fastener into the nearest hole in the beaded tie strap. See view A or B.

ABC

If the washer faucets and the drain standpipe are recessed, put the formed end of the drain hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the drain hose. See view C.

LeveltheWasher

Properly leveling your washer avoids excessive noise and vibration.

Install the Front Leveling Feet

1.Prop up the front of the washer about 10.2 cm (4") with a wood block or similar object. The block needs to support the weight of the washer.

10.2 cm (4")

A

A. Threaded holes for feet

2.Screw the locknut onto each foot to within 2.5 cm (1") of the foot base.

2.5 cm

(1")

3.Screw the feet into the threaded holes at the front corner of the washer until the nuts touch the washer. Twist the feet to install.

NOTE: Do not tighten the nuts until the washer is level.

4.Tilt the washer back and remove the wood block. Gently lower the washer to the floor.

Steps in Final Location

1.Slide the washer to its final location.

2.Tilt the washer forward until the rear of the washer is at least 10.2 cm (4") off the floor. You may hear the self-adjusting rear feet click into place. Lower the washer to the floor.

10.2 cm (4")

A

A. Self-adjusting feet

3.Check the levelness of the washer by placing a level on the top edges of the washer, first side to side, then front to back.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Washer Installation Instructions Efgh 35.6 cm 310 cm Page Page Page ABC Page Washer Safety Alternate Parts ToolsandPartsLocationRequirements Parts suppliedElectricalRequirements DrainSystemStraight power cord BeforeYouStartRemoveShippingMaterials To keep drain water from going back into the washer Looped power cordConnectDrainHose Remove drain hose from washer cabinetConnecttheInletHoses Steps in Final Location Install the Front Leveling FeetSecuretheDrainHose LeveltheWasherCompleteInstallation

W10038070 specifications

The Whirlpool W10038070 is a highly versatile and efficient refrigerator water filter designed to provide clean and purified water for you and your family. This filter is compatible with a range of Whirlpool refrigerator models, ensuring that users have access to safe drinking water directly from their appliances.

One of the standout features of the W10038070 is its advanced filtration technology, which effectively reduces common contaminants found in tap water, such as chlorine taste and odor, lead, and other harmful impurities. This ensures that the water dispensed from your refrigerator is not only refreshing but also healthier for consumption. The filter employs activated carbon technology, known for its ability to absorb contaminants, making every glass of water crisp and clean.

The installation process for the W10038070 is designed to be user-friendly. It features a no-tools-required, push-fit design that allows homeowners to easily replace the filter in minutes without the need for professional assistance. This convenience is a significant advantage for busy households, eliminating the hassle often associated with water filter replacements.

In terms of specification, the W10038070 has a lifespan of approximately six months or 200 gallons of filtered water, depending on usage and water quality. This longevity makes it a cost-effective choice for maintaining water quality without frequent replacements. Additionally, the filter is designed to maintain optimal water flow rate while delivering quality filtration.

Whirlpool stands behind the quality of its products, and the W10038070 is no exception. It is certified for safety and performance by NSF International, which guarantees that the filter meets rigorous safety standards. This certification provides peace of mind to consumers, ensuring that their families are drinking safe, treated water.

In summary, the Whirlpool W10038070 combines convenience, efficiency, and reliability. With its advanced filtration capabilities, easy installation, and long-lasting performance, it is an essential accessory for any Whirlpool refrigerator, significantly enhancing the quality of water available in your home. Whether you're filling a glass of water or making ice, the W10038070 ensures that you are enjoying the purest taste with every sip.
Top Page Image Contents