Whirlpool TAWMZOOA Operating, Washer, Before starting your washer, Selecting a wash temperature

Operating					Your	Washer
In This		Section			Paqe					Page	I
Before	starting your			washer	-5	Using	rinse	and	spin	-8
Starting	or stopping			your washer	5	Using	drain	and	spin	.8
Selecting		a wash	temperature		5	What	happens	in	each cycle	9
Selecting		a cycle	and	time	6

Operating your washer properly assures maximum wastiing efficiency. This section gives you important information to help you to select a cycle, time, and temperature for your wash load.

Before starting your washer

Add measured detergent. Then place a sorted load in the washer before starting. See page 11 for additional “Before you wash” information.

Starting or stopping your washer

Starting your washer:

1.Push in the Cycle Control Knob and turn it clockwise. Stop when the indicator on the knob’s outer ring points to the number and wash water temperature in the cycle you want. The numbers are minutes of wash time. Wash water temperature is indicated by the letter near the wash time.

2.Pull out the Cycle Control Knob.

Wash water temperature

r -4 I

Stopplng and restartlng your washer:

l To stop the washer at		any time,	push	in the
Cycle Control	Knob.				1
. To restart the	washer,	close the	lid (if	neces-	Wash time

sary) and pull out the Cycle Control Knob.

Selecting a wash temperature

Match the wash water temperature to the type of fabric and soils being washed. All rinses are cold.

For hot wash water, turn the Cycle Control Knob to Heavy, 14 minutes wash time.

For warm wash Knob to Regular, Short, 6 minutes

water, turn the Cycle Control 10 minutes wash time; or wash time.

For cold wash water, turn the Cycle Control Knob to Normal, 6 minutes wash time; or Short, 2 minutes wash time.

5