Whirlpool TAWMZOOA warranty What happens in each cycle

Page 9

What happens in each cycle

When the Cycle Control Knob is set to a number and pulled out, the washer fills (with the selected water temperature) before agita- tion and timing start. The washer will begin agitating immediately after filling; agitation can occur with the washer lid up or down. After agitation starts, the knob turns clockwise until it points to OFF and the cycle ends.

The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.

NOTE: If your washer drains into a laundry tub, remove lint collected in tub or strainer.

F4-l Fill

Wash selected time

Drain-No agitation

Spin

Fill

Rinse

Drain-No agitation

Spin

Image 9

Contents Using Chlorine FeaturesIf You Need Assistance Or Service Understanding WasherThank you for buying an Estate appliance Your safety is important to usUnderstanding your responsibilities Important Safety InstructionsKnowing Your Washer3 Features Operating Selecting a wash temperatureWasher Before starting your washerSelecting a cycle Water temperature tipsTime Heavy cycleRegular cycle Normal cycleShort cycle Using drain and spin Using rinse and spinWhat happens in each cycle Using The Chlorine Bleach Dispenser This Before you washPreparing clothes for washing SortingLoading Suggestions Removing stainsPre-washing or soaking Stain removal rulesStain Stain removal guideTo Remove PerspirationWater Water TemperatureWater USE ForChlorine bleach Using laundry aidsAll-fabric bleach DetergentWashing special-care items Fiberglass materials Solving laundering problems ProblemCause Saving energy Caring for your washerWinterizing your washer To use the washer againProblem Possible Cause Solution If You Need Assistance Or SetviceBefore calling for assistance If you are not satisfied with how the problem was solved If you need serviceIf you need assistance If you need FSP@ replace- ment partsPage Limited FIVE-YEAR Warranty Estate Washer WarrantyLimited TEN-YEAR Warranty Whirlpool will PAY for