INSTALLATIONREQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. The parts supplied are in the washer basket.
Parts needed (not provided with washer):
■ Inlet hoses | ■ Flat washers |
Toorder:
■Call the dealer from whom you purchased your washer.
■Reference the
■Visit the website on the front page of the Washer User Instructions.
NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for future reference.
Parts supplied:
ABC
A. Beadedtie strap
B.Frontlevelingfeet with nuts (2)
C.Drainhose form
Tools needed for installation:
■ Adjustable or open end | ■ Ruler or measuring tape | ||
| wrench 9⁄16" (14 mm) | ■ | Pliers that open to 19⁄16" |
■ | Level |
| (3.95 cm) |
■ | Wood block | ■ | Flashlight (optional) |
Alternate Parts
Your installation may require additional parts. For information on ordering, please refer to the
If YouHave: | You Will Need to Buy: |
|
|
Laundry tub or | Sump pump system (if not already |
standpipe taller | available) |
than 96" (2.4 m) |
|
|
|
1" (2.5 cm) | 11⁄4" (3.2 cm) diameter to 1" (2.5 cm) |
diameter | diameter standpipe adapter, |
standpipe | Part Number 280130 |
|
|
Overhead sewer | Standard 20 gal. (76 L) 39" (99 cm) tall |
| drain tub or utility sink, sump pump, and |
| connectors (available from local |
| plumbing suppliers) |
|
|
Floor drain | Siphon break kit, Part Number 280129; |
| additional drain hose, |
| Part Number 3357090 |
|
|
Water faucets | Water Mll hoses: |
beyond reach | 10 ft (3.0 m) Black EPDM, |
of Mll hoses | Part Number 8212656RP |
| 6 ft (1.8 m) Braided Nylon with 90° Elbow, |
| Part Number 8212638RP |
| 5 ft (1.5 m) Braided Nylon, |
| Part Number 8212487RP |
| 6 ft (1.8 m) Black EPDM with 90° Elbow, |
| Part Number 8212637RP |
| 5 ft (1.5 m) Red & Blue EPDM, |
| Part Number 8212545RP |
| 5 ft (1.5 m) Black EPDM, |
| Part Number 8212641RP |
| 4 ft (1.2 m) Black EPDM, |
| Part Number 8212546RP |
|
|
Drain hose | Kit Part Number 280131 |
too short |
|
Lint clogged drain | Drain protector, Part Number 367031 |
|
|
2