Whirlpool NTW5100TQ installation instructions Straight power cord, Looped power cord

Page 5

Straight power cord

1.Remove power plug and yellow strap from machine base to release the rear leveling system.

2.Firmly grasp the power cord and pull to completely remove the power cord, cord restraint, and pin from the rear panel.

3.ConMrm that the power cord restraint (A) and pin (B) are removed.

4.To remove the power cord from the cord restraint, push the power cord in, press TAB, and then pull the power cord out.

1.Firmly grasp the yellow shipping strap and pull until both ends are completely removed from washer.

2.Check that two (2) cotter pins were removed with the shipping strap.

A.Powercord restraint

B.Pin

Image 5

Contents Washersafety Tools and Parts Tools needed for installationParts needed not provided with washer Parts suppliedYou will need Location RequirementsDrainSystem BeforeYouStartRemoveShippingMaterials ElectricalRequirementsLooped power cord Straight power cordClear the water lines ConnectDrainHoseConnect theInletHoses Secure the Drain Hose Install the front leveling feetLevelthe Washer Check for leaksSlide the washer to its Mnal location CompleteInstallationSteps in Dnal location Outillageet pièces Outillage nécessaire pour l’installationPièces nécessaires non fournies avec la laveuse Pièces fourniesIl vous faudra Exigencesd’emplacementSystème de vidange Avant de commencer Spéci,cations électriquesUne prise adéquatement mise à la terre En boucleCordon d’alimentation en boucle Cordon d’alimentation droitPurger les canalisations d’eau Raccordementdu tuyau de vidangeRetirer le tuyau de vidange de la caisse de la laveuse Drain de plancherRaccorder les tuyaux d’arrivée d’eau à la laveuse Immobilisationdu tuyaude vidangeInspection-recherche des fuites Réglage de l’aplombde la laveuse SP PN W10200662B W10200331B Acheverl’installation