Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator
Daily check
2 | Visual |
| |
| indicator |
If required, open the cover B (press the dedicated button).
Add rinse aid to the max. line ~150 ml
The rinse aid dosage can be adjusted to the detergent used. The lower the setting, the less rinse aid is dispensed (factory setting: position 4).
Press the button to open the cover B. Using a coin or similar object, turn the arrow to the desired setting. After adjusting the rinse aid setting, shut the cover again.
Check the rinse aid indicator to check the level into the dispenser.
(depending on the model)
Rinse aid indicator on the control panel
The indicator lamp lights up when RINSE AID NEEDS TO BE ADDED.
Rinse aid indicator on the dispenser
dark: OK. | clear: NEEDS TO BE ADDED |
Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of the appliance.
If there are streaks: reduce the dosage by turning the dial to a lower setting
Detergents with rinse aid incorporated may be effective only with longer programs. In the case of shorter programs, detergent residue may be a problem (if necessary, use powder detergent). Detergents with rinse aid incorporated tend to form excess suds.
Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations
Daily use
Open the cover A | Insert detergent: Tablet / powder / liquid into the big chamber | Shut the cover | |
(press the dedicated button). |
|
| by pressing dedicated ribs. |
3 | Only fill the | Use only one tablet per one cycle, only |
|
detergent dispenser | placed in detergent dispenser. |
| |
| prior to starting a |
|
|
| wash program. | All types of tablets can be used, but for |
|
|
| 2 in 1 type adding of salt is mandatory. |
|
GB