Samsung SWV-1200F service manual Driving Compartment Test Mode

Page 13

7. Test Mode

1

2

3

1.Driving Compartment Test Mode

A. Hold down “2” and ” 1” keys simultaneously and then press O(POWER S/W) on. (Display shows “tE”)

Hold down “1” and “2” keys simultanesously (each processing for 0.3sec) and then press O(POWER S/W) on.

B. The driving compartment can be tested when you press “3” key right after entering into the intial stage of the TEST MODE.

Driving Compartment Test

Pre-wash VALVE ON(0.3sec) OFF(0.3sec) Main wash(0.3sec) OFF(0.3sec) Rinse VALVE ON(0.3sec) OFF(0.3sec) Pump MOTOR ON(0.3sec) OFF(0.3sec) MOTOR RELAY1 ON(0.3sec) OFF(0.3sec) MOTOR RELAY2(0.3sec) OFF(0.3sec) MOTOR RELAY2 ON(0.3sec) OFF(0.3sec) HEATER RELAY ON(0.3sec) OFF(0.3sec) DOOR OPEN (Function continues when door is closed)

10

SAMSUNG ELECTRONICS CO., LTD

Image 13
Contents Washing Machine Do not clean the main body with the water Execute A/S after unplugging the power supply unitCheck the assembly status of the parts after servicing Pull out the power cord with holding the plugSpecifications Overview of the Washing Machine Delay Start buttonOPTION Temperature selection buttonOverview of the control panel Spin selection buttonManual button Course buttonStart/Pause button Door Open buttonOPTIONGeneral Error Function ASS’Y-COVER TOP Assemble and DisassembleFrame Front Belt How to Assemble the Relay Housing. CautionMotor Tool Tools for Disassembly and AssemblyTrouble Diagnosis Power Supply PlugCause and treatment Driving Compartment Test Mode Test ModeDriving Compartment Test Normal / Reverse Revolution of Motor and R. P. M. Control Designation of Main ComponentsASSY-TUB NSA Expolded View and Parts ListExpolded View and Parts List ASSY-WIRE Diaphragm Expolded View and Parts List NSA DECORATION-LID ABS,SIL/COATING,SWF-P12 ASSY-PANEL Front PCB Circuit Diagram PCB Schematic Diagram