Samsung SWV-1200F service manual Assemble and Disassemble, Ass’Y-Cover Top, Frame Front

Page 8

10. Assemble and Disassemble

1.ASS’Y-COVER TOP

1)Remove two screws fixing the top-cover on back side.

2)Push the top-cover back about 15mm and pull it up.

3)It’s possible to exchange and service the trans former, the pressure-senser, the noise-filter and the water valve.

2.FRAME FRONT

1)Remove the top-cover and the ass’y drawer.

2)Remove two screws fixing the control-panel on front side and the screw on right side.

3)Remove the cover-front(L) by using the (-)driver.

4)Pull the lever and open the ass’y-door.

5)Part the diaphragm and the wire diaphragm away from the frame-front.

6)Remove the eight screws fixing the frame-front.

7)It’s possible to exchange and service the heater, the pump, the shock-absorber and the door lock s/w.

SCREW

LEVER

16	SAMSUNG ELECTRONICS CO., LTD

Image 8

Contents Washing Machine Execute A/S after unplugging the power supply unit Do not clean the main body with the waterCheck the assembly status of the parts after servicing Pull out the power cord with holding the plugSpecifications Overview of the Washing Machine Temperature selection button Delay Start buttonOPTIONOverview of the control panel Spin selection buttonCourse button Manual buttonStart/Pause button Door Open buttonOPTIONGeneral Error Function Frame Front Assemble and DisassembleASS’Y-COVER TOP Motor How to Assemble the Relay Housing. CautionBelt Tools for Disassembly and Assembly ToolPower Supply Plug Trouble DiagnosisCause and treatment Driving Compartment Test Test ModeDriving Compartment Test Mode Designation of Main Components Normal / Reverse Revolution of Motor and R. P. M. ControlASSY-TUB Expolded View and Parts List NSAExpolded View and Parts List ASSY-WIRE Diaphragm Expolded View and Parts List NSA DECORATION-LID ABS,SIL/COATING,SWF-P12 ASSY-PANEL Front PCB Circuit Diagram PCB Schematic Diagram