Samsung SWV-1200F service manual Belt, Motor, How to Assemble the Relay Housing. Caution

Page 9

10. Assemble and Disassemble

3. BELT

2

1) Remove the top-cover.

2) Disassemble and assemble the belt.

3) Check the belt is located at center of the motor-pulley. <When assemble the belt>

Hook the belt on the motor pulley 1) and place it around the pulley 2).

PULLEY

BELT

1

4. MOTOR

1) Lay down the washer on left side.

2) Remove the wire housing from the motor.

3) Remove the bolt fixing the motor with the box drive on back side.

4) Remove the motor.

MOTOR

5.How to Assemble the RELAY Housing. <CAUTION>

Insert the Relay Housing to the Relays on the opposite direation each other.

Motor Assemble Hole

Relay

RELAY Housing

Heat Sink

SAMSUNG ELECTRONICS CO., LTD

17

Image 9

Contents Washing Machine Do not clean the main body with the water Execute A/S after unplugging the power supply unitCheck the assembly status of the parts after servicing Pull out the power cord with holding the plugSpecifications Overview of the Washing Machine Delay Start buttonOPTION Temperature selection buttonOverview of the control panel Spin selection buttonManual button Course buttonStart/Pause button Door Open buttonOPTIONGeneral Error Function Assemble and Disassemble ASS’Y-COVER TOPFrame Front How to Assemble the Relay Housing. Caution BeltMotor Tool Tools for Disassembly and AssemblyTrouble Diagnosis Power Supply PlugCause and treatment Test Mode Driving Compartment Test ModeDriving Compartment Test Normal / Reverse Revolution of Motor and R. P. M. Control Designation of Main ComponentsASSY-TUB NSA Expolded View and Parts ListExpolded View and Parts List ASSY-WIRE Diaphragm Expolded View and Parts List NSA DECORATION-LID ABS,SIL/COATING,SWF-P12 ASSY-PANEL Front PCB Circuit Diagram PCB Schematic Diagram