Sears 9709, 110.9708 manual Dryer Care, Cleaning the Dryer Location, Cleaning the Lint Screen

Page 22

DRYER CARE

Cleaning the Dryer Location

Keep dryer area clear and free from items that would obstruct the flow of combustion and ventilation air.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Place dryer at least 18 inches (46 cm) above the floor for a garage installation.

Failure to do so can result in death, explosion, or fire.

Cleaning the Lint Screen

Every load cleaning

The lint screen is located in the door opening of the dryer. The control panel has an indicator light to remind you to clean the lint screen before or after each load. A screen blocked by lint can increase drying time.

To clean

1.Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove.

2.Push the lint screen firmly back into place.

IMPORTANT:

Do not run the dryer with the lint screen loose, damaged, blocked, or missing. Doing so can cause overheating and damage to both the dryer and fabrics.

If lint falls off the screen into the dryer during removal, check the exhaust hood and remove the lint. See “Venting Requirements.”

As needed cleaning

Laundry detergent and fabric softener residue can build up on the lint screen. This buildup can cause longer drying times for your clothes, or cause the dryer to stop before your load is completely dry. The screen is probably clogged if lint falls off the screen.

Clean the lint screen with a nylon brush every 6 months, or more frequently, if it becomes clogged due to a residue buildup.

To wash

1.Roll lint off the screen with your fingers.

2.Wet both sides of lint screen with hot water.

3.Wet a nylon brush with hot water and liquid detergent. Scrub lint screen with the brush to remove residue buildup.

4.Rinse screen with hot water.

5.Thoroughly dry lint screen with a clean towel. Replace screen in dryer.

Cleaning the Dryer Interior

To clean dryer drum

1.Make a paste with powdered laundry detergent and very warm water.

2.Apply paste to a soft cloth.

OR

Apply a liquid, nonflammable household cleaner to the stained area and rub with a soft cloth until all excess dye and stains are removed.

3.Wipe drum thoroughly with a damp cloth.

4.Tumble a load of clean cloths or towels to dry drum.

NOTE: Garments that contain unstable dyes, such as denim blue jeans or brightly colored cotton items, may discolor the dryer interior. These stains are not harmful to your dryer and will not stain future loads of clothes. Dry unstable dye items inside out to avoid dye transfer.

Removing Accumulated Lint

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often, depending on dryer usage. Cleaning should be done by a qualified person.

From the Exhaust Vent

Lint should be removed every 2 years, or more often, depending on dryer usage.

22

Image 22
Contents Gas Dryer Table of Contents Kenmore Elite Appliance WarrantyDryer Safety Product RecordParts supplied Installation InstructionsTools and Parts Parts neededYou will need Location RequirementsPedestal Color Part Height Number 10 25.4 cmDryer Dimensions Installation clearancesInstallation spacing for cabinet installation Mobile home installations require Mobile home additional installation requirementsElectrical Requirements Gas Supply Requirements Dryer gas pipe If using an existing vent systemVenting Requirements If this is a new vent system Vent materialPlan Vent System Optional exhaust installationsAlternate installations for close clearances ExhaustSpecial provisions for mobile home installations Install Vent SystemInstall Leveling Legs Vent system chartConnect Vent Level DryerMake Gas Connection For mobile home useRemove the door Reverse Door SwingReverse the hinge Reinstalling the door Reverse the door handleComplete Installation If the dryer will not start, check the followingTo use an Auto Cycle Dryer USEStarting Your Dryer To make changes during an Auto CycleControl Locked Pausing or RestartingStopping Your Dryer Drying and Cycle TipsStatus Lights CyclesUltra Delicate Auto Dry Preset Cycle SettingsTimed Preset Cycle Settings Timed CyclesOptions End of Cycle Signal End of Cycle SignalChanging the Preset Dryness Level Settings Tumble Free Heated Dryer RackCleaning the Dryer Interior Cleaning the Dryer LocationCleaning the Lint Screen Dryer CareChanging the Drum Light TroubleshootingVacation and Moving Care Dryer OperationDryer Results Protection Agreements Sears Installation ServiceMaster Protection Agreements Índice USO DE LA SecadoraGarantía DE LOS Electrodomésticos Kenmore Elite Garantía Limitada DE UN AÑOSeguridad DE LA Secadora Su seguridad y la seguridad de los demás es muy importantePiezas suministradas Instrucciones DE InstalaciónHerramientas y piezas Piezas para adquirirPedestal opcional Requisitos de ubicaciónUsted necesitará Espacio para la instalación en el gabinete Dimensiones de la secadoraEspacios para la instalación Instalación en el clóset Sólo secadoraRequisitos eléctricos Las instalaciones en casas rodantes necesitanRequisitos del suministro de gas Si usa un sistema de ventilación existente Requisitos de ventilaciónEl tubo de gas de la secadora Si éste es un nuevo sistema de ventilaciónInstalaciones opcionales de escape RespiraderoDeterminación de la vía del ducto de escape Instalación del sistema de ventilaciónInstalaciones alternas para espacios limitados Cuadro del sistema de ventilaciónConexión del suministro de gas Instalación de las patas niveladorasNivelación de la secadora Para su uso en casas rodantesDesmontaje de la puerta Conexión del ducto de escapeInversión del cierre de la puerta Inversión de la bisagraInversión de la manija de la puerta Reinstalación de la puertaComplete la instalación Si la secadora no funciona, revise lo siguientePuesta en marcha de la secadora USO DE LA SecadoraPara usar un ciclo de secado automático Control bloqueado Detención de la marcha De la secadoraPausa o reanudación de la marcha Sugerencias de ciclos y secadoLuces de estado CiclosAjustes de ciclos prefijados de secado automático Informal CasualRopa ultradelicada Ultra Delicate Ciclos ProgramadosOpciones Modificadores Cambio de ciclos, opciones y ModificadoresSeñal de fin de ciclo Señal de fin de ciclo End of Cycle SignalEstante térmico de la secadora Limpieza del filtro de pelusa Cuidado DE LA SecadoraLimpieza del lugar donde está La secadora Limpieza del interior de la secadoraCambio de la luz del tambor Solución DE ProblemasEliminación de pelusa acumulada Funcionamiento de la secadoraLa secadora muestra mensajes codificados Resultados de la secadoraEl tiempo del ciclo es demasiado corto Contratos DE Protección W10035620

9709, 110.9708 specifications

The Sears 110.9708 and 110.9709 are popular models in the world of sewing machines, known for their user-friendly features and versatile capabilities. These machines are often favored by both beginners and seasoned sewers, due to their balance of functionality and convenience.

One of the standout features of the Sears 110.9708 and 110.9709 is their range of built-in stitches. These models typically offer a selection of decorative, stretch, and utility stitches, allowing users to explore creativity while sewing garments, quilts, or craft projects. The adjustable stitch length and width provide further customization, ensuring that sewers can achieve their desired results for various projects.

In terms of ease of use, these machines come equipped with intuitive controls. A simple, easy-to-read display guides the user through selecting stitches and adjusting settings. Automatic features, such as the needle threader, significantly reduce setup time and frustration, making these models appealing to those who may be new to sewing.

The Sears 110.9708 and 110.9709 also boast durable construction. They feature a robust build quality, ensuring reliability throughout countless projects. Additionally, the metal chassis provides stability during sewing, reducing vibrations that can affect precision and finish quality.

Another noteworthy characteristic of these machines is their versatility. With the ability to handle various fabric types, ranging from lightweight silks to heavier denim, they are equipped to tackle a wide range of sewing tasks. The adjustable presser foot pressure allows sewers to adapt to different materials, ensuring smooth operation regardless of the fabric used.

For those keen on quilting, these models often include features suited for quilting enthusiasts. Some come with a quilting foot and a walking foot option, facilitating smooth fabric movement and perfecting stitching patterns.

Finally, both the Sears 110.9708 and 110.9709 are compatible with a variety of accessories, expanding their capabilities. With the right attachments, users can explore tasks such as embroidery, buttonholing, and more, further enhancing the machine's flexibility and utility.

Overall, the Sears 110.9708 and 110.9709 serve as excellent sewing companions, combining technology, ease of use, and durability to nurture creativity and elevate sewing projects for users of all skill levels.