Sears 110.9708, 9709 manual Location Requirements, Pedestal, You will need, 15.5 39.4 cm

Page 5

For close-clearance installations between 31.5" (80.01 cm) and 37" (93.98 cm), see “Plan Vent System” section for venting requirements.

37"

(93.98 cm)

Mobile home installations require special parts (listed following) available for purchase from your local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME®(1-800-469-4663).

Mobile Home Installation Kit. Ask for Part Number 346764.

Metal exhaust system hardware.

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Place dryer at least 18 inches (46 cm) above the floor for a garage installation.

Failure to do so can result in death, explosion, or fire.

Optional Pedestal

Are you placing the dryer on a pedestal? You have the option of purchasing pedestals of different heights separately for this dryer. You may select a 10" (25.4 cm) pedestal or a 15.5" (39.4 cm) pedestal with a storage drawer. The pedestal will add to the total height of the dryer for a total height of approximately 46"

(116.8 cm) or 51.5" (130.8 cm), respectively.

For a garage installation, you will need to place the 10" (25.4 cm) pedestal at least 9" (22.9 cm) above the floor. You will need to place the 15.5" (39.4 cm) pedestal at least 3" (7.6 cm) above the floor.

Optional pedestal (15.5" [39.4 cm] model shown)

The pedestals are available in several colors.

To order, call your local Sears store. For further information, please call 1-800-4-MY-HOME®(1-800-469-4663).

Pedestal

Color

Part

Height

 

Number

 

 

 

10" (25.4 cm)

White

46822

 

 

 

10" (25.4 cm)

Black Diamond

46826

 

 

 

15.5" (39.4 cm)

White

57822

 

 

 

15.5" (39.4 cm)

Black Diamond

57826

 

 

 

15.5" (39.4 cm)

Pacific Blue

57827

 

 

 

15.5" (39.4 cm)

Champagne

57828

 

 

 

15.5" (39.4 cm)

Barolo

58829

 

 

 

You will need

A location that allows for proper exhaust installation. A gas dryer must be exhausted to the outdoors. See “Venting Requirements.”

A grounded electrical outlet located within 2 ft (61 cm) of either side of the dryer. See “Electrical Requirements.”

A sturdy floor to support the total dryer weight of

200 lbs (90.7 kg). The combined weight of a companion appliance should also be considered.

A level floor with a maximum slope of 1" (2.5 cm) under entire dryer. (If slope is greater than 1" [2.5 cm], install Extended Dryer Feet Kit, Part No. 279810.) Clothes may not tumble properly and automatic sensor cycles may not operate correctly if dryer is not level.

For a garage installation, you will need to place the dryer at least 18" (46 cm) above the floor. If using a pedestal, you will need 18" (46 cm) to the bottom of the dryer.

Do not operate your dryer at temperatures below 45ºF (7ºC). At lower temperatures, the dryer might not shut off at the end of an automatic cycle. Drying times can be extended.

The dryer must not be installed or stored in an area where it will be exposed to water and/or weather.

Check code requirements. Some codes limit, or do not permit, installation of the dryer in garages, closets, mobile homes, or sleeping quarters. Contact your local building inspector.

NOTE: No other fuel-burning appliance can be installed in the same closet as a dryer.

5

Image 5
Contents Gas Dryer Kenmore Elite Appliance Warranty Table of ContentsProduct Record Dryer SafetyTools and Parts Installation InstructionsParts supplied Parts neededPedestal Location RequirementsYou will need Color Part Height Number 10 25.4 cmInstallation spacing for cabinet installation Installation clearancesDryer Dimensions Electrical Requirements Mobile home additional installation requirementsMobile home installations require Gas Supply Requirements Venting Requirements If using an existing vent systemDryer gas pipe If this is a new vent system Vent materialAlternate installations for close clearances Optional exhaust installationsPlan Vent System ExhaustInstall Leveling Legs Install Vent SystemSpecial provisions for mobile home installations Vent system chartMake Gas Connection Level DryerConnect Vent For mobile home useReverse the hinge Reverse Door SwingRemove the door Reverse the door handle Reinstalling the doorIf the dryer will not start, check the following Complete InstallationStarting Your Dryer Dryer USETo use an Auto Cycle To make changes during an Auto CycleStopping Your Dryer Pausing or RestartingControl Locked Drying and Cycle TipsCycles Status LightsTimed Preset Cycle Settings Auto Dry Preset Cycle SettingsUltra Delicate Timed CyclesOptions Changing the Preset Dryness Level Settings End of Cycle SignalEnd of Cycle Signal Tumble Free Heated Dryer RackCleaning the Lint Screen Cleaning the Dryer LocationCleaning the Dryer Interior Dryer CareVacation and Moving Care TroubleshootingChanging the Drum Light Dryer OperationDryer Results Master Protection Agreements Sears Installation ServiceProtection Agreements USO DE LA Secadora ÍndiceGarantía Limitada DE UN AÑO Garantía DE LOS Electrodomésticos Kenmore EliteSu seguridad y la seguridad de los demás es muy importante Seguridad DE LA SecadoraHerramientas y piezas Instrucciones DE InstalaciónPiezas suministradas Piezas para adquirirUsted necesitará Requisitos de ubicaciónPedestal opcional Espacios para la instalación Dimensiones de la secadoraEspacio para la instalación en el gabinete Instalación en el clóset Sólo secadoraLas instalaciones en casas rodantes necesitan Requisitos eléctricosRequisitos del suministro de gas El tubo de gas de la secadora Requisitos de ventilaciónSi usa un sistema de ventilación existente Si éste es un nuevo sistema de ventilaciónRespiradero Instalaciones opcionales de escapeInstalaciones alternas para espacios limitados Instalación del sistema de ventilaciónDeterminación de la vía del ducto de escape Cuadro del sistema de ventilaciónNivelación de la secadora Instalación de las patas niveladorasConexión del suministro de gas Para su uso en casas rodantesInversión del cierre de la puerta Conexión del ducto de escapeDesmontaje de la puerta Inversión de la bisagraReinstalación de la puerta Inversión de la manija de la puertaSi la secadora no funciona, revise lo siguiente Complete la instalaciónPara usar un ciclo de secado automático USO DE LA SecadoraPuesta en marcha de la secadora Pausa o reanudación de la marcha Detención de la marcha De la secadoraControl bloqueado Sugerencias de ciclos y secadoCiclos Luces de estadoRopa ultradelicada Ultra Delicate Informal CasualAjustes de ciclos prefijados de secado automático Ciclos ProgramadosOpciones Cambio de ciclos, opciones y Modificadores ModificadoresEstante térmico de la secadora Señal de fin de ciclo End of Cycle SignalSeñal de fin de ciclo Limpieza del lugar donde está La secadora Cuidado DE LA SecadoraLimpieza del filtro de pelusa Limpieza del interior de la secadoraEliminación de pelusa acumulada Solución DE ProblemasCambio de la luz del tambor Funcionamiento de la secadoraEl tiempo del ciclo es demasiado corto Resultados de la secadoraLa secadora muestra mensajes codificados Contratos DE Protección W10035620

9709, 110.9708 specifications

The Sears 110.9708 and 110.9709 are popular models in the world of sewing machines, known for their user-friendly features and versatile capabilities. These machines are often favored by both beginners and seasoned sewers, due to their balance of functionality and convenience.

One of the standout features of the Sears 110.9708 and 110.9709 is their range of built-in stitches. These models typically offer a selection of decorative, stretch, and utility stitches, allowing users to explore creativity while sewing garments, quilts, or craft projects. The adjustable stitch length and width provide further customization, ensuring that sewers can achieve their desired results for various projects.

In terms of ease of use, these machines come equipped with intuitive controls. A simple, easy-to-read display guides the user through selecting stitches and adjusting settings. Automatic features, such as the needle threader, significantly reduce setup time and frustration, making these models appealing to those who may be new to sewing.

The Sears 110.9708 and 110.9709 also boast durable construction. They feature a robust build quality, ensuring reliability throughout countless projects. Additionally, the metal chassis provides stability during sewing, reducing vibrations that can affect precision and finish quality.

Another noteworthy characteristic of these machines is their versatility. With the ability to handle various fabric types, ranging from lightweight silks to heavier denim, they are equipped to tackle a wide range of sewing tasks. The adjustable presser foot pressure allows sewers to adapt to different materials, ensuring smooth operation regardless of the fabric used.

For those keen on quilting, these models often include features suited for quilting enthusiasts. Some come with a quilting foot and a walking foot option, facilitating smooth fabric movement and perfecting stitching patterns.

Finally, both the Sears 110.9708 and 110.9709 are compatible with a variety of accessories, expanding their capabilities. With the right attachments, users can explore tasks such as embroidery, buttonholing, and more, further enhancing the machine's flexibility and utility.

Overall, the Sears 110.9708 and 110.9709 serve as excellent sewing companions, combining technology, ease of use, and durability to nurture creativity and elevate sewing projects for users of all skill levels.