Venting Requirements, Dryer gas pipe | Sears 110.9708, 9709 guide

Dryer gas pipe

■The gas pipe that comes out through the rear of your dryer has a ³⁄₈" male pipe thread.

*6¼"

(15.9 cm)

A		1½"

		(3.8 cm)

A. ½" NPT gas supply line

B. ³⁄₈" NPT dryer pipe

*NOTE: If the dryer is mounted on a pedestal, the gas pipe height must be an additional 10" (25.4 cm) or 15.5" (39.4 cm) from the floor, depending on the pedestal model. For a garage installation, the gas pipe height must be an additional

18" (46 cm) from the floor.

Venting Requirements

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS.

IMPORTANT: Observe all governing codes and ordinances.

The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling or a concealed space of a building.

If using an existing vent system

■Clean lint from the entire length of the system and make sure exhaust hood is not plugged with lint.

■Replace any plastic or metal foil vent with rigid or flexible heavy metal vent.

■Review Vent system chart. Modify existing vent system if necessary to achieve the best drying performance.

If this is a new vent system

Vent material

■Use a heavy metal vent. Do not use plastic or metal foil vent.

■4" (10.2 cm) heavy metal exhaust vent and clamps must be used. DURASAFE™ venting products are recommended.

10.2 cm

4" (10.2 cm) heavy metal exhaust vent

DURASAFE™ vent products can be purchased from your dealer. For further information, please call

1-800-4-MY-HOME®(1-800-469-4663) or visit our website at www.sears.com.

Rigid metal vent

■For best drying performance, rigid metal vents are recommended.

■Rigid metal vent is recommended to avoid crushing and kinking.

Flexible metal vent

■Flexible metal vents are acceptable only if accessible for cleaning.

■Flexible metal vent must be fully extended and supported when the dryer is in its final location.

■Remove excess flexible metal vent to avoid sagging and kinking that may result in reduced airflow and poor performance.

■Do not install flexible metal vent in enclosed walls, ceilings or floors.

Elbows

45° elbows provide better airflow than 90° elbows.

GoodBetter

Clamps

■Use clamps to seal all joints.

■Exhaust vent must not be connected or secured with screws or other fastening devices that extend into the interior of the duct. Do not use duct tape.

Clamp

9709, 110.9708 specifications

The Sears 110.9708 and 110.9709 are popular models in the world of sewing machines, known for their user-friendly features and versatile capabilities. These machines are often favored by both beginners and seasoned sewers, due to their balance of functionality and convenience.

One of the standout features of the Sears 110.9708 and 110.9709 is their range of built-in stitches. These models typically offer a selection of decorative, stretch, and utility stitches, allowing users to explore creativity while sewing garments, quilts, or craft projects. The adjustable stitch length and width provide further customization, ensuring that sewers can achieve their desired results for various projects.

In terms of ease of use, these machines come equipped with intuitive controls. A simple, easy-to-read display guides the user through selecting stitches and adjusting settings. Automatic features, such as the needle threader, significantly reduce setup time and frustration, making these models appealing to those who may be new to sewing.

The Sears 110.9708 and 110.9709 also boast durable construction. They feature a robust build quality, ensuring reliability throughout countless projects. Additionally, the metal chassis provides stability during sewing, reducing vibrations that can affect precision and finish quality.

Another noteworthy characteristic of these machines is their versatility. With the ability to handle various fabric types, ranging from lightweight silks to heavier denim, they are equipped to tackle a wide range of sewing tasks. The adjustable presser foot pressure allows sewers to adapt to different materials, ensuring smooth operation regardless of the fabric used.

For those keen on quilting, these models often include features suited for quilting enthusiasts. Some come with a quilting foot and a walking foot option, facilitating smooth fabric movement and perfecting stitching patterns.

Finally, both the Sears 110.9708 and 110.9709 are compatible with a variety of accessories, expanding their capabilities. With the right attachments, users can explore tasks such as embroidery, buttonholing, and more, further enhancing the machine's flexibility and utility.

Overall, the Sears 110.9708 and 110.9709 serve as excellent sewing companions, combining technology, ease of use, and durability to nurture creativity and elevate sewing projects for users of all skill levels.