REPLACEMENT PARTS AND ACCESSORIES
If your dryer requires replacement parts or accessories, contact the dealer from whom you purchased your dryer or the SAMSUNG customer care center at
INSTALLATION
Gather the required tools and parts before starting the installation.
Read and follow the instructions provided with any tools listed here.
Tools and Parts
Pliers |
| Cutting knife |
| Pipe wrench (gas only) |
| Nut drivers |
|
|
|
|
|
|
|
01 installing your dryer
Level | Phillips Screwdriver | Duct tape | Wrench |
|
|
|
|
For proper installation, we recommend that you hire a professional. To install:
1.Move your dryer to an appropriate location for installation. Consider installing the dryer and washer side
Lay two of the carton
2.Set your dryer back in an upright position.
3.To ensure that the dryer provides optimal drying performance, it must be level. To minimize vibration, noise, and unwanted movement,the floor must be a perfectly level, solid surface.
To set the dryer to the same height as the washer, fully retract the | Level | ||
leveling feet by turning them counterclockwise, then loosen the legs | |||
|
| ||
by turning them clockwise |
|
| |
|
|
Retract fully
Then loosen
Adjust the leveling feet only as much as necessary to level the dryer. Extending the leveling feet more than necessary can cause the dryer to vibrate.
Leveling feet
installing your dryer _15