Samsung DV361EWBEWRA3 Digital Graphic, Display, Dry Level, Selection Button, Temp Selection

		The display window shows the estimated time remaining in the cycle after the
		Start/Pause button is pressed. The estimated time remaining may fluctuate as
		the cycle progresses.
		The Drying light will illuminate and remain lit until the cycle is complete.
		When your dryer is in the cool-down phase, the Cooling light will illuminate.
4	Digital Graphic	When your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will
	Display	illuminate.
		When the cycle is complete, “END” appears in the display panel until the
		dryer door is opened, the Power, Close or Start button is pressed or 5
		minutes have passed.
		If your dryer is paused during a cycle, the indicator lights will blink until the
		Start/Pause button is pressed.
		To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
		press the Dry Level button. An indicator light will illuminate next to the desired
	Dry Level	dryness level. Press the button repeatedly to scroll through the settings.
5		Larger or bulkier loads may require the More Dry setting for complete
	Selection Button
		dryness. The Less Dry setting is best suited for lightweight fabrics or for
		leaving some moisture in the clothing at the end of the cycle. Use for items
		that lay flat or hang to dry.
		To select the correct temperature for the load, press the Temp button. An
		indicator light will illuminate next to the desired temperature. Press the button
		repeatedly to scroll through the settings.
6	Temp Selection	High – For sturdy cottons or those labeled Tumble Dry.
		Medium – For permanent press, synthetics, lightweight cottons, or items
	Button
		labeled Tumble Dry Medium.
		Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
		Extra Low – Provides the lowest heated dry temperature possible.
		When using Manual Dry cycles, time can be adjusted by pressing the Time
7	Time Selection	Selection button.
	Button	During the Sensory Dry cycle, the time light indicator is off because exact
		drying times are determined by fluctuating humidity levels.
8	Start/Pause	Press to pause and restart programs.
	selection button
		Press once to turn your dryer on, press again to turn it off. If your dryer is left
9	Power button	on for more than 10 minutes without any buttons being touched, the power
		automatically turns off.
		This is an alarm that notifies the user when the average dry level is damp dry
		(80% dried). This is useful when the laundry contains various types of clothing
10	Mixed load bell	you do not want to dry completely. An alarm sounds for five (5) seconds while
	button	continuing to perform the cycle.

This function can only be selected in the Sensor Dry course, and the dry level can only be selected from among Normal Dry, More Dry.

02 operating Instructions, tips

operating Instructions, tips _21

DV361_363-02810F_EN.indd Sec5:21 2012-06-07 ￿￿ 7:56:06