operating Instructions, tips
CHILD LOCK
A function to prevent children from playing with your dryer.
Setting/Releasing
If you want to set or release the Child Lock, press both the Time and Signal buttons simultaneously for 3 seconds.
How to Set:
1.It can be set while your dryer is running.
2.Once you set the Child Lock function, no button, except for the Power button, can be controlled until you release the Child Lock function.
3.The Child Lock indicator will be lit.
1.If the dryer is powered on again, the Child Lock function stays on.
2.To release that function, follow the instructions above.
When other buttons, except for the Power button, do not respond, check the Child Lock indicator.
MY CYCLE
Lets you activate your customized cycle that includes Dry Level, Temp, Time option, etc.
By pushing the My Cycle button, you activate the settings used during the previous My Cycle mode. (Default : Normal Cycle)
If My Cycle mode is activated, My Cycle lamp will be lit. You can select all options in My Cycle mode as follows.
1.Select cycle using Cycle Selector dial.
2.After cycle selection, set each option.
Each cycle has certain default options that are automatically set.
To see these default options, go to page
3.Then, you can start My Cycle by pushing the Start/Pause button in My Cycle mode. The cycle and options you select will be displayed the next time you choose My Cycle.
You can change the My Cycle settings by repeating same process above.
The last used setting will be displayed the next time you choose My Cycle.